Quick SET-UP

To Quickly Set Up the Home Producer to Operate Your Home Entertainment Components

NOTE: If the four-digit code for your device begins with a “0”, only the last three numbers of your code will be displayed.

1	Turn on all of the components that
	you will be setting up.
2	Press and release the TV key.
3	Press and hold SETUP until the
	display screen changes from
	[TV and the TIME] to [TIMED SEQ].
4	Press the MENU – key one time.
	The display screen will change to
	[CODE SETUP]. Press SELECT.
	The display will change to
	[DEV SET UP]. Press SELECT. The
	display will change to [TV].
5	Enter the first TV code listed for your
	brand in the “Set Up Codes for TVs”
	on pages 10-12, then press
	SELECT. Point the remote control at
	the TV and press POWER. Your
	Television should turn OFF. If your TV
	does not turn OFF, enter the
	next code in the code list then press
	SELECT followed by POWER again.
	Once your TV turns OFF, press VCR.
	You will now enter your VCR code.
6	Enter the first VCR code listed for
	your brand in the “Set Up Codes for
	VCRs” on pages 13-14, then press
	SELECT. Point the remote control at
	the VCR and press POWER. Your
	VCR should turn OFF. If your VCR
	does not turn OFF, enter the next
	code in the code list then press
	SELECT followed by POWER again.
	Once your VCR turns OFF, press

CBL/SAT. You will now enter your

Cable Box code.

7	9
7	Continue to enter your codes as
	illustrated in Steps 5 and 6 until the
	Home Producer is operating all of
	your home entertainment
	components. Once you have fin-
	ished setting up your components,
	press ESC to return to the [DEVICE
	and TIME] display.

If you would like to set up each of your components individually, or if you purchase a component after you have set up the A/V Home Producer, go to the “SETTING UP INDIVIDUAL HOME ENTERTAINMENT COMPONENTS” section on pages 10 to 23 in this manual.

Set Up Codes for TVs	Page 10
Set Up Codes for VCRs	Page 13
Set Up Codes for TV/VCR Combinations	Page 14
Set Up Codes for Cable Boxes	Page 16
Set Up Codes for DSS and
Satellite Receivers	Page 17
Set Up Codes for DVD or LD Players	Page 19
Set Up Codes for CD or MD Players	Page 20
Set Up Codes for Tuner/Receivers	Page 22
Set Up Codes for Amplifiers	Page 23