One for All URC 9800 manual HOW to USE the Sleep KEY, Volume Lock, Sleep Lock

Page 21

40

HOW TO USE THE SLEEP KEY

The Home Producer has a SLEEP key that either operates your component’s sleep timer or, if your component does not have a sleep timer, it activates the Home Producer’s built-in sleep timer, after you activate SLEEP LOCK (see below). To use the Home Producer’s SLEEP key, press SLEEP (i.e., SHIFT + MUTE).

If your component does not have a sleep timer, the Home Producer will access its own built-in timer. To activate it, press SLEEP (i.e., SHIFT + MUTE). The display will change to [SLEEP 15]. To add time to the sleep timer, press MENU –. Each press of MENU – will add 15 minutes to the sleep timer, up to a total of 60 minutes. Once the desired time is displayed on the LCD screen, press SELECT. The display screen will change to [SLEEP and the TIME].

Sleep Lock

If you would like Home Producer to use its built-in sleep timer on all of your components, you can lock the SLEEP mode, as follows:

1

Press and hold SETUP until the dis-

 

play screen changes from [DEVICE

 

and the TIME] to [TIMED SEQ].

2x 2 Press the MENU – key twice, the display will change to [CONFIG- URE]. Press SELECT, the display will change to [THEATR SEL]. Press MENU + thrice, the display

x 3 will read [SLEEP LOCK]. Press SELECT, the display will change to [DISABLE].

3

Press MENU – once to change the

 

display to [ENABLE], then press

 

SELECT. The display will return to

 

[DEVICE and the TIME]. Now,

 

whenever you press SLEEP (i.e.,

 

SHIFT + MUTE), Home Producer

 

will use its own built-in sleep timer.

41

VOLUME LOCK

With the Home Producer, you can choose which home entertainment component controls your vol- ume. When you originally set up the Home Producer, each individual component operates its own volume, provided the component has volume control. You can change this setting so that one component controls the volume, whether Home Producer is in the TV, VCR, or CBL/SAT mode. For example, to set-up the Home Producer to always control the volume through your Amplifier in the TV, VCR, or CBL/SAT mode:

1

Press and hold SETUP until the dis-

 

play screen changes from [DEVICE

 

and the TIME] to [TIMED SEQ].

2x 2 Press the MENU – key twice, the display will change to [CONFIG- URE]. Press SELECT, the display

will change to [THEATR SEL].

3x 2 Press MENU – two more times, the display will read [VOL LOCK]. Press SELECT, the display will

change to [UNLOCK].

4

Press MENU – one time to change

 

the display to [LOCK] then press

 

SELECT. Now press the key for the

 

component that will control your vol-

 

ume. For example, to control the vol-

 

ume through your amplifier, press

 

AMP. Press SELECT. The display

 

will return to [DEVICE and the TIME].

Now, when you use the volume keys on your

Home Producer, the volume will be controlled by the specified component.

To return volume control to a component:

1

Press and hold SETUP until the dis-

 

play screen changes from [DEVICE

 

and the TIME] to [TIMED SEQ].

NOTE: When using the built-in sleep timer, pressing POWER will

 

cancel the sleep function.

(continued on next page)

 

Page 20 Page 22
Image 21
Page 20 Page 22
Contents URC Home Producer User Guide Installing the Batteries ContentsUsing Your Home Producer Features and FunctionsFeature Function Keys are not mode specific Setting the ClockPIP, REW, PLAY, FF, STOP, Timed SEQQuick SET-UP Set Up Codes for TVs Setting UP Individual HomeTo Set Up Your Television DEV SET UPTo Set Up Your VCR or TV/VCR Combinations Set Up Codes For VCRsSet Up Codes for TV/VCR Combinations Set Up Codes For VCRs To Set Up Your Cable BoxSet Up Codes For Cable Boxes Set Up Codes for DSS and Satellite ReceiversTo Set Up Your DSS or Satellite Receiver To Set Up Your CD or MD Player Set Up Codes for LD PlayersTo Set Up Your Tuner/Receiver Set Up Codes for CD or MD PlayersSet Up Codes For Tuner/Receivers Set Up Codes for AmplifiersTo Set Up Your Amplifier Re-assigning Device Keys Setting UP Additional Home Entertainment ComponentsSearching for Your Code Setting UP the Home Theater KEY Device Key TV, VCR, CBL/SAT or DVD to Sequence Tuner + Power + TV + PowerDevice Key TV, CBL/SAT, or VCR to choose Device Key KeysTV, CBL/SAT, VCR, TunerLearning Functions Onto the 1L Through 6L Keys Time Deleting Functions from the L keys SEQ Select againTo Delete a Timed Sequence SAT + Power + SAT + 2 + 7 + 5 +HOW to USE the Shift KEY + TV/SAT to change the input on the TV to Video 1 + SAT +Cluded, press ESC to save Volume Lock HOW to USE the Sleep KEYWill use its own built-in sleep timer To return volume control to a componentKeymover Setting UP and Using the IR/RF Command Center Clear ALLCLR ALL Command Center Setting UP and Using the IR/RFSpecifications TroubleshootingCompliance with the FCC Rules and Regulations CH +/- and Prev Error MessagesKEY Index TV Functions+ The Prog key Shift + Menu operates your secondary menus PIP key accesses your VCR’s Picture-in-Picture feature VCR FunctionsCenter and Rear Shift + Cable Functions PIP key accesses your Picture- in-Picture featuresDSS & Satellite Functions DVD/LD/Cassette Functions+ The Display key Shift + Prev CH operates the display on Receiver/Tuner FunctionsBalance Right Amplifier FunctionsKeys on your original remote control Track access the same as the digitCD Functions Digit keys 0 9 control directHome Automation Functions WarrantyPage URC-9800 REV a Home Producer M9800
Top Page Image Contents