1.Press and hold the device key (TV, SAT•CBL•DTC, DVD•VCR,
AUDIO, or AUX) whose code you wish to retrieve. The POWER key illuminates. Keep pressing the device key.
2.While holding the device key down, press and hold the INFO key. The POWER key illumination turns off. After holding down both keys for three seconds, it turns back on.
3.Release both keys. The POWER key remains illuminated.
4.Starting with the number 1 key, press and release each
number key on the keypad in the following order:
0. The number that causes the POWER key to blink is the first number of the code. As you find each number of the code, write it down for future reference. Then start with the number 1 key again.
5.Repeat step 4 until you have retrieved all five numbers in the code. After the fifth number is retrieved, the POWER key blinks briefly, then turns off.
Quick Code Reference
Device Type |
| Code |
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Learning
Codes from the Code Lists include basic functionality for each component they control. Once you have programmed in the code for your specific component, you can customize the universal remote to include certain functions from your original remote(s) that were not embedded in the preset code. Your universal remote has the ability to learn and store commands from your original remote(s) under the mode(s) of your choice. The universal remote can store up to 50 key commands.* Only one original remote can be learned under any one mode (e.g., the universal remote can learn commands for one TV remote, one VCR remote, etc.).
*Some learned signals require more memory than others. In these cases, fewer key commands can be learned.
Before First-Time Learning
Before you start learning keys for the first time, clear any stored learning information that might be in the remote. This lets you begin with a clean slate.
1.Press and hold the EXIT key (the POWER key illuminates). While you’re holding down the EXIT key, use your other hand to press and hold the POWER key (the POWER key illumination turns off).
2.Wait until the POWER key comes on and stays on. Then release both keys. The remote is now in the Master Clear mode.
3.Press the OK key to confirm the Clear operation. The POWER key remains on for 2 seconds, then turns off. All Learned functions for all components are now cleared; all other programming remains intact.
12