One for All URC-9990 manual Viewing Macros

VIEWING MACROS

To see what commands are stored in a macro, perform the following steps:

1.On the Device Screen in the upper left corner, tap on Setup. You will see the main SETUP Menu that greets you and asks, “What would you like to configure? ”

2.Tap on the PERSONALIZATION key. You will see the PERSONALIZATION Menu.

NOTE: To return to a previous menu, tap on the ESC key. To return to last-displayed Device Screen, press down on ESC or MUTE for at least 2 seconds. For help, tap the ? key.

3.Tap on the MACROS key. You will see the main MACROS Menu.

4.Tap on the VIEW key. You will see the VIEW MACROS Menu.

Esc	MACROS	?	Esc	VIEW MACROS
	Program a sequence of
keystrokes onto one key.			Select a Macro key.
			M 1	M 2	M 3
	ADD
Tap on	VIEW
	COPY

DELETE

DELETE ALL

5.Tap on any displayed Macro key (e.g., M1, M2, etc.). You will see the commands that make up the selected macro. To return to previous menu, tap on the ESC key. To return to the Device Screen, press down on ESC or MUTE for at least 2 seconds.

www.oneforall.com 15