Introduction
Your ONE FOR ALL MOSAIC is designed to let you use one remote to operate your Video and Audio equipment; any device designed to be operated by an infrared signal. This also includes those devices which operate over 100 kHz. You can choose any combination of 15 devices you would like to operate. The ONE FOR ALL MOSAIC comes available with the world’s largest and most efficient database of infrared codes for device compatibility. It is further enhanced by ONE FOR ALL’s patented upgrade- ability. Also, what makes the MOSAIC even more unique is the "Learning" feature which allows you to customise any of the special functions of your original remote control onto the keypad of your new
ONE FOR ALL.
The following pages explain in simple steps how to customize the ONE FOR ALL MOSAIC to your home entertainment needs.
Installing Batteries
Your MOSAIC needs 4 new "AA/LR6" alkaline batteries .
1.Remove the battery cover from the back of the ONE FOR ALL MOSAIC by pressing down on the tab.
2. Match the batteries to the + and – marks inside the battery case, then insert the batteries.
3. Press the battery cover back in place.
Low-Battery Indicator
Whenever the batteries need replacement,
the MOSAIC will emit a "beep sound" (even if the sound is turned off). The MOSAIC will indicate this as well on the top portion of the screen with a "Battery Low" message.
At this point, only the control functions will work and all of the MOSAIC’s DEVICE SETUP and PER- SONALIZATION parameters will be disabled to pre- vent accidental loss of any entered commands should the batteries run out.
Simply replace the batteries as soon as possible. Press any IR key and the MOSAIC will be restored to its full functionality, complete with your favourite settings.
Low Battery Indicator
Setup | THEATER |
|
Battery Low | ||
TV | CBL | VCR |
AV |
| PWR |
1 | 2 | 3 |
4 | 5 | 6 |
7 | 8 | 9 |
0 |
| |
www.oneforall.com | 3 |