Setup by Code

Find the code for your device in the Set-Up Code section (starting on page 128). Codes are listed by device type and brand name. The most popular code is listed first. Make sure your device is switched on (not in standby). Newly captured Manufacturer’s codes are available for customer access on our web site www.oneforall.com.

1.Tap on Setup key (upper left corner).

2.Tap on DEVICE SETUP.

NOTE: To return to a previous menu, tap on the ESC key. To return to last-displayed Device Screen, press down on ESC or MUTE for at least 2 seconds. For help, tap the ? key.

	Esc		DEVICE SETUP	?
	Welcome to Device Setup!
			What method
		would you like to use?
			BY BRAND
			BY SEARCH
Tap on			BY CODE
Tap on			BY CODE
			DELETE

Then tap on

Esc

CODE SETUP

	Esc	CODE SETUP
	Select the device.
Tap on	TV	CBL	SAT
	VCR	DVD	LD
	TUN	AMP	CD
	TAPE	DAT	PHO
	V.ACC	HOME

Esc

CODE SETUP

Esc

CODE SETUP

Enter the 4 digit code, press OK to save.

Device Code

1 2 3

4 5 6

7 8 9

CLEAR 0

	Enter the 4 digit code,
	press OK to save.
	Device Code
First,		1234

Would you like to

ADD the device or REPLACE

it with an existing one?

enter
code.	1	2	3

ADD

Tap on if 2nd TV

page 128-143	4	5	6
	7	8	9
	CLEAR	0

REPLACE

Tap on if 1st TV

3.Tap on the OK key to confirm your choice. MOSAIC will ask if you want to relabel the newly-added device.

•To relabel it, tap on the YES key and you will see the LABEL Menu (see explanation on page 25 step 6).

•To keep the label the same, tap on the NO key.

You will see a confirmation screen that says the key has been successfully programmed. To program another device, tap on the ESC key. To return to the Device Screen, press on ESC or MUTE for at least 2 seconds.

To test remote control of the newly-added device, tap on its key on the Device Selection Strip. Try using the Hard Keys to adjust volume and change channels. Try tapping on the Page Arrows to access other remote control functions and then try tapping on the soft keys on each page to test them.

8	www.oneforall.com