Setup by Search

As an alternative method, you can use MOSAIC’s search program to find the correct manufacturer’s codes to set up your entertainment devices. With this method you first select a device you want to add, then you perform a code test, advancing through one or more types, to find the one that works.

Example: to use the search method for your television:

Esc DEVICE SETUP ?

Welcome to Device Setup!

What method

would you like to use?

Tap on

	BY BRAND
Tap on	BY SEARCH
	BY CODE
	DELETE

Esc SEARCH

Select the device.

TV CBL SAT

VCR DVD LD

TUN AMP CD

TAPE DAT PHO

V.ACC HOME

Esc SEARCH OK

Esc SEARCH ?

To check previous code, tap on

First, tap on

Use the test keys to find your device type. Press OK to save.

PREVNEXT

Test

PWR

If device does not respond, tap and repeat test.

Would you like to

ADD the device or REPLACE

it with an existing one?

Tap on if 2nd TV

ADD

REPLACE

Tap on if 1st TV

Tap on the OK key to confirm your choice. MOSAIC will ask if you want to relabel the newly-added device.

•To relabel it, tap on the YES key and you will see the LABEL Menu (see explanation on page 25 step 6).

•To keep the label the same, tap on the NO key.

You will see a confirmation screen that says the key has been successfully programmed. To program another device, tap on the ESC key. To return to the Device Screen, press on ESC or MUTE for at least 2 seconds.

To test remote control of the newly-added device, tap on its key on the Device Selection Strip. Try using the Hard Keys to adjust volume and change channels. Try tapping on the Page Arrows to access other remote control functions and then try tapping on the soft keys on each page to test them.