Installing the Batteries, Keypad, Power LED

Installing the Batteries

Your ONE FOR ALL requires 4 new “AAA/LR03” alkaline batteries.

1Remove the battery cover from the back of your ONE FOR ALL by

pressing down on the tab.

2Match the batteries to the + and - marks inside the battery case, then insert the batteries.

3Press the batte ry cover back into place.

Important notes:

-Do not use rechargeable batteries.

-In order to avoid having to reprogram your ONE FOR ALL after you remove the batteries, you will need to insert new batteries within 15 minutes.

The Keypad

See picture of ONE FOR ALL remote on page 2.

Magic Key

The MAGIC key is used to set up your ONE FOR ALL.

POWER (LED)

The POWER key operates the same function it did on your original remote control. The red light (LED - Light Emitting Diode) underneath the POWER key will light up every time a key is pressed.

3Teletext Keys

These keys are used to operate the main Teletext functions. Of course, your television must have Teletext capability.

TEXT ON: Puts the television in the Teletext mode.

MIX: Shows teletext and regular television simultaneously. You may also use this key for subtitling. On some televisions this function is accessed by pressing the text key twice.

TEXT OFF:	Switches the television back to regular viewing
	mode. On some televisions, this may be done by
	pressing the TEXT ON key several times.
EXPAND:	Shows the top half of the Teletext page in larger let-
	ters. By pressing again, you can see the bottom half
	of the Teletext page enlarged. To return to regular
	Teletext viewing, press the EXPAND key again, or
	press the TEXT ON key, depending on your television.
16:9	This key provides the (16:9) wide screen view
	function, if available on your original remote).

HOLD/STOP: Stops changing pages.

Important note: For a more detailed explanation of Teletext and Fastext, please refer to the manual of your television. Remember, different televisions control Teletext and Fastext features in different ways. Not all of the Teletext functions may be available for your particular model.

4NUMBER KEYS (0-9, -/- -, AV)

The Number keys (0-9, -/--, AV) provide functions just like your original remote, such as direct access channel selection. If your original remote uses one/two digit input switching (-/-- symbol), this function can be obtained by pressing the -/-- key. If your original remote has an 10 key, this function can also be found under the -/-- key. If your original remote has an 20 key, this function can also be found under the AV key.