One for All URC-7711 instruction manual Setting up the ONE for ALL, Direct code set-up

Setting up the ONE FOR ALL 1

(How to set-up the ONE FOR ALL 1 to control your television)

Direct code set-up

To set up the ONE FOR ALL 1 for your television:

1.

2.

3.

4.

5.

Make sure your device (television) you wish to operate is switched on (not in standby).

O					Find the code for your device in the Code List
		R
NEFO
	0009	3,0363,		041
Adm on	0087,009				(page 83 - 90). The device codes are listed per brand
	0264
Acura	0217,0216
iral	0516
Adys				,
Agazi	0087	,0037			name. Also the most popular code for each brand is
Aiko	0361,0208
B	6,0009			1
AG	021	0274
Agef	0037,		,037
					listed first. If your brand is not listed at all, try
					the Search Method on page 7.
					Press and hold down MAGIC until the red light
					blinks twice (the red light will blink once then twice).
					Enter your four-digit device code using the num-
__ __
					ber keys. The red light will blink twice.
					Now aim the ONE FOR ALL 1 remote at your
					device (television) and press POWER. If your
					device switched off, the ONE FOR ALL 1 is ready to
					operate your device.

-Most TV’s do not switch back on pressing the POWER key, please try pressing a “number” key or the “TV-text off” key to switch your TV back on.

-If your device does not respond, follow steps 1 through 5 with each code listed for your brand. If none of the codes listed for your brand operate your device, then try the Search Method described on page 7, even if your brand is not listed at all.

-Some codes are quite similar. If your device does not respond or is not functioning properly with one of the codes, try another code listed under your brand.

-Write your device code in the applicable four digit boxes provided in the battery compartment and on page 8 for future reference.

6 WWW.O NEFORALL.CO M