JVC AV 60D501 manual Connecting a DVD Player

Page 11

Connections 11

Connecting a DVD Player

1) Connect the Component Video cables from the video output jacks at the back of the DVD player to the DVD input jacks at the back of the television. Make the connections in the following order: Y to Y, PR to PR, PB to PB.

2) Connect a set of audio cables from the Audio Output jacks at the back of the DVD player to the DVD Audio Input jacks located at the back of the television next to the Component Video Input Jacks.

3) Connect the red audio cable from the right Audio Output to the right Audio Input.

4) Connect the white audio cable from the left Audio Output to the left Audio Input.

Connecting a Camcorder

You can quickly connect a camcorder to your D-Series Projection Television using the input jacks located under the front panel door. If you wish, you may connect your camcorder to the rear input jacks by following these steps.

1) Lift gently on the front panel door to open it.

2) Connect the yellow video cable from the camcorder to the Video Input jack on the TV.

3) Connect the white audio cable from the camcorder to the right Audio Input jack on the TV.

4) If your camcorder is a stereo model, connect the red audio cable from the camcorder to the left Audio Input jack on the TV.

S-Video Connection

There is also an S-Video input located at the front of the television. If you have a camcorder with an S-Video connection, you may use this input. Use either the S-Video or Video input jack, do not use both.

• Other devices, such as game consoles, may be connected using the front input jacks.

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Projection Television Users Guide Important Safety Precautions USE Table of Contents Connections Connections Connections Checklist Read ME FirstFront Panel Cable or Antenna Connections Connections VCR Connections Audio/Video Connections Stereo Systems Connecting a DVD Player Getting Started RM-C889Power Remote Programming Setting the Catv & VCR CodesCodes Onscreen Menus Using the MenuMemorize Channels Setup MenuIntroduction Memorize ChannelsTV Speakers Clock TimeAV Connection Set DayAudio Output LanguageAV Receiver at Input Viewing Guidelines To set up the TV Parental Guideline RatingsChip ChipDirections to Block Unrated Programs Directions to Set TV RatingsDirections to Set Movie Ratings Movie RatingsLock By Time Accessing V-Chip InformationSet V-Chip/Lock Time Channel Info Menu Channel Info MenuSelecting Names for Inputs Selecting Super Quick View SQV ChannelsClosed Captions Advanced FeaturesAdvanced Features Timer OptionConvergence TimerReset Factory Defaults Select Video MuteAV Memory Audio/Video SettingsAdjusting the Audio and Video Settings AV Reset for StandardAudio Settings Audio SettingsVideo Settings Video SettingsButton Functions Remote Control ButtonsSQV Picture-In-Picture PIP / Picture-Outside-Picture POP Button Functions PIP/POPChannel +/- For PIP/POP PIP CH Working with PIPTroubleshooting Speakers CleaningTo Remove the Screen Shield Appendix 1- Screen ShieldCut along dotted line and file after reading Appendix 2 Bypassing the Parent LockAt Input IndexVCR Codes Video mute Page What YOU Must do for Warranty Service Limited WarrantyToll Free 1 800 Authorized Service CentersSpecifications
Top Page Image Contents