JVC HD-65S998 manual Connecting to an External Amplifier

Page 19

Quick Setup

Connecting to an External Amplifier

TV Side Panel

AUDIO

OUTPUT

L

R

SpeakerSpeaker

Amplifier

1)Connect a white cable from the LEFT AUDIO OUTPUT on the side of the TV to the LEFT AUDIO INPUT on the amplifier.

2)Connect a red cable from the RIGHT AUDIO OUTPUT on the side of the TV to the RIGHT AUDIO INPUT on the amplifier.

Notes:

•Refer to your amplifier’s manual for more information.

•You can use AUDIO OUTPUT for your home theater system.

•You can not output audio using the AUDIO OUTPUT under the following conditions:

1)When you have digital sound from an HDMI device connected to the INPUT-1 or INPUT-2 connection on the side of your TV. (See page 21).

2)When you have analog sound from a DVI device connected to the AUDIO IN "INPUT-1" connection. (See page 20).

Connecting to an amplifier using your optical output

You can connect an amplifier that has an optical digital input terminal by using an optical digital cable from the optical output. The signal that is output can be PCM or DOLBY DIGITAL.

Amplifier

TV Side Panel

OPTICAL OUT

Digital Audio

1)Connect the optical cable from the side of the TV to the back of the amplifier.

Notes:

•This terminal can only output digital audio.

•In order to use the optical output connection, select PCM or DOLBY DIGITAL on Digital Sound in the Digital Setup Menu. See page 50.

•Refer to your owners manual on using your amplifier.

19

Image 19

Contents Projection Television Users Guide Important Safety Precautions Important Safety Instructions FCC Notice Caring for the Screen Caring for the CabinetLamp is a consumable item When the power is turned on, the warming up commencesOrder to use the television for a long time Cooling the inside of the television and the lampDo not replace the lamp immediately after use Television requires a lot of electrical powerILA element characteristics Screen is made of plasticTo attach the front and rear pedestal Attaching or removing the pedestalsTo remove the front and rear pedestal Table of Contents Unpacking your TV Quick SetupFront Panel Diagram Side Panel DiagramTV Model RM-C1400 Remote ControlBasic Operation Using Menu ButtonsGetting Started Component Cables Composite Cables Audio Cables Connecting Your DevicesCoaxial Cables Video CableVCR Connection Diagram #2 Camcorder Connecting to a CamcorderConnecting to an amplifier using your optical output Connecting to an External AmplifierConnecting to a Digital TV Receiver Connecting to an Hdmi Compatible Device Monitor OUT Looking at the images from a computer Connecting to the computerWhen a picture is not displayed Table of signals for each type of computerInteractive Plug In Menu LanguageManual Clock Set Auto Clock SetNOW Programming Auto Tuner SetupOnscreen Menus Using the GuideSelected Option Blue Onscreen Menu SystemOnscreen Menu System Selected Option GreenInitial Setup CLOCK/TIMERS To Initial SetupAuto Tuner Setup Digital Channels Channel SummaryContinue to follow these directions for all four spaces Chip Channel Guard MessageDirections to Block Unrated Programs Unrated ProgramsUS V-Chip Ratings Directions to set US V-Chip Ratings Setting US V-Chip RatingsDirections to set Movie Mpaa Ratings Movies RatingsDirections to set Canadian V-Chip Ratings Canadian V-Chip RatingsSet Lock Code Language Analog SettingClosed Caption If you want to cancel the settings, select cancel Digital Auto SettingDigital Manual Setting Noise Muting Auto Shut OffV3 Smart Input Front Panel LockVideo Input Label Power Indicator Position AdjustmentVideo-1 Audio Hdmi SizeAntenna Level Digital SetupSoftware Version Digital SoundSoftware Update Adjust the Picture Settings Picture SettingsColor Temperature Dynamic Gamma Color ManagementAdvanced Smart Picture Digital VNR Natural CinemaMpeg NR ResetVolume Limit Sound SettingsAdjust the Sound Settings Turn On VolumeThank YOU Set ClockOn/Off Timer Following message will appear Lamp Timer ResetTune PowerVolume + Number Buttons 10Key PadInput Digital/AnalogTo watch digital channels ModeBack Return +/TVLight MenuRegister the favorite channel FavoriteDelete the favorite channel Aspect Aspect Ratios in PC ModeAspect Ratios By pressing the Aspect button, you can change the size GuideSub Channel SoundTo watch sub channels Video Status Sleep Timer Message Sleep TimerSwap TwinExternal device control buttons SelectFreeze DisplayRemote programming How to set the codesSearch Code Function Programming Codes STB modeVCR mode VCR PVR DVD mode Audio mode Invalid Signal Weak SignalNo Program Lamp Warning Lamp MessageUnplug the television Replacement Lamp KitHow to Replace the Lamp Turn off the televisionRemove the lamp unit Install the new lamp unitPower LED and Lamp LED blink rapidly simultaneously Power LED and Lamp LED blink alternatelyLamp LED blinks Troubleshooting Following are not malfunctions Specifications subject to change without notice SpecificationsPage Page Page JVC Company of America JVC CANADA, INC