Controls and functions
Projector
1
2
4 | 9 | |
10 | ||
| ||
5 | 6 | |
6 | 11 | |
| ||
3 | 6 | |
12 | ||
7 | ||
8 | 6 | |
|
1. Focus ring | 7. MODE |
Adjusts the focus of the projected image. See "Fine- | Sequentially selects a predefined picture setting |
tuning the image size and clarity" on page 26 for | available for each input. See "1. Selecting a picture |
details. | mode" on page 28 for details. |
2. Zoom ring | 8. ENTER |
Adjusts the size of the image. See | Enacts the selected |
image size and clarity" on page 26 for details. | item. See "Using the menus" on page 36 for details. |
English
3. POWER
Turns the projector on or off. See pages 23, 34 and 47 for details.
4.POWER indicator light
Lights up or flashes when the projector is operating. See "Temperature information" on page 47 for details.
9.TEMPerature warning light
Lights up or flashes if the projector’s temperature becomes too high. See "Temperature information" on page 47 for details.
10.LAMP indicator light
Lights up or flashes when the projector lamp has developed a problem. See "Temperature information" on page 47 for details.
5.MENU
Toggles the
6.Keystone /Arrows buttons (eLeft, cUp, fRight, dDown)
Manually corrects distorted images resulting from an angled projection. See "Correcting two- dimensional keystone" on page 26 for details. When the
11.EXIT
Exits and saves any changes made using the On- Screen Display (OSD) menu. See "Using the menus" on page 36 for details.
12.SOURCE
Sequentially selects the input signal
Introduction 11