BenQ CP120C user manual Connecting a Component Video source device

Page 24

Connecting a Component Video source device

Examine your Video source device to determine if it has a set of unused Component Video output sockets available:

•If so, you can continue with this procedure.

•If not, you will need to reassess which method you can use to connect to the device.

To connect the projector to a Component Video source device

1.Take the (optional accessory) Component Video to VGA (D-Sub) adaptor cable and connect the end with 3 RCA type connectors to the Component Video output sockets of the Video source device. Match the color of the plugs to the color of the sockets; green to green, blue to blue, and red to red.

2.Connect the other end of the Component Video to VGA (D-Sub) adaptor cable (with

a D-Sub type connector) to the D-SUB/COMP IN socket on the projector. The final connection path should be like that shown in the following diagram:

Component Video to VGA (D-Sub) adaptor cable

A/V device

Component Video is the only video output that delivers native 16:9 aspect ratio picture.

If you connect the projector to a High Definition TV (HDTV) tuner, the following standards are supported:

•	480i	•	480p
•	576i	•	576p
•	720p (50/ 60 Hz)	•	1080i (50/ 60 Hz)

If the selected video image is not displayed after the projector is turned on and the correct video source has been selected, check that the Video source device is turned on and operating correctly. Also check that the signal cables have been connected correctly.

18 Connection

Image 24

Contents Welcome Copyright DisclaimerTable of Contents Fine-tuning the image size and clarity Iv Table of ContentsTable of Contents Memo Vi Table of Contents Important safety instructions But could fail if power cuts or surgesImportant safety instructions Safety instructions Do not block the ventilation holes Following environments Do not place this unit on a blanketBedding or any other soft surface Other itemSafety instructions Projector features IntroductionIntroduction Shipping contents Projector exterior view Front / Upper sideRear side Lower sideControls and functions External control panelTurns the projector on or off Adjusts the focus of the projected image Selects one of the application modesRemote control description Freeze buttonRemote control effective range Installing or replacing the remote control batteryPositioning your projector Choosing a locationObtaining a preferred projected image size EquipmentSelect your screen size Positioning your projector Screen size chart Maximum Minimum ZoomScreen Center of lens Projection distance Connecting a computer ConnectionConnection Connecting Video source devices Best video qualityConnecting a Component Video source device Component Video to VGA D-Sub adaptor cable DeviceConnecting an S-Video source device Video cable DeviceConnecting a composite Video source device Using the projector Using the projectorStart up Utilizing the password function To set a passwordIf you forget the password Adjusting the height To enter the password recall procedureTo change the password Auto-adjusting the image Fine-tuning the image size and clarityThat you need using the zoom ring Focus ring Correcting keystoneSelecting an application mode Brightest Presentation Default SRGB/Photo Gaming VideoMovie default Cinema Photo Gaming Using the projector Automatic keystone correctionSwitching input signal Hiding the imageRemote paging operations Freezing the imageDisconnect the power cord from the wall socket ShutdownMenu operation Menu systemUsing the menus Picture menu Selected Application Mode KeystoneColor Temp Depends onPro-Picture menu Setting menu Advance menu Turned off. Selecting Off disables this function Auto Off OffEconomic Periods of time 10hours without shutdownResolution Mode EquivalentInformation Menu SourceMaintenance Care of the projectorCalculation of lamp hour Message StatusReplacing the lamp Temperature information Resetting the lamp counterIndicators Projector needs to cool after the power is Turned offStand-by mode Powering upMaintenance Troubleshooting Projector does not turn onNo picture Image is unstableRemote control does not work Specifications Projector specificationsDimensions Timing chartHorizontal Vertical Pixel Resolution Frequency Mode KHz MHz Supported timing for PC inputSignal Format Horizontal Frequency Vertical Frequency KHz Supported timing for Component-YPbPrInputSupported timing for Video and S-Video inputs Warranty Limited warrantyWarranty Regulation statements FCC statementEEC statement Ices Statement CanadaMemo Regulation statements