DLP ™ Digital Projector User’s Guide
Safety
These safety precautions include information to prevent personal injury and damage to the projector.
Safety Definitions
WARNING:
Statements identify conditions or practices that could result in personal injury.
CAUTION:
Statements identify conditions or practices that could result in damage to your equipment.
Projector Safety
WARNING:
•Please use the power cord provided. Connect the power cord to a receptacle with a protective safety (earth) ground terminal.
•Don’t look directly into the lens when the lamp is on. Doing so may cause eye injury.
•Servicing your own projector may expose you to hazards or create potential hazards. Also, servicing your own projector will void the warranty. Refer all service to qualified service personnel.
•Do not loosen or remove any screws other than those on the lamp module cover and the lamp module. Doing so may result in electric shock.
•For information about use of a feature, please refer to this User Guide.
•Hot surface. Do not touch.
CAUTION:
•Proper ventilation is important. Don’t block ventilation openings. Never operate this projector in an enclosed area. Do not place the projector on a tablecloth or other soft covering that may block the vents. With ceiling installations, use approved mounting hardware. Do not put the projector near heaters, air cleaners, transformers or other electrical devices. For permanent installations follow local codes.
•Don’t set liquids on the projector. Spilled liquids may damage your projector.
•Don’t put the projector on a hot surface or in direct sunlight.
•Do not drop the projector.
2