Power Button, Menu Button, Auto Button, Directional

DLP ™ Digital Projector User’s Guide

The following buttons are located on the projector Control Pad or on the Remote Control

Power Button	Switch power on or off.
	Use the Power button to begin the warm-up period. The power
	light blinks green during warm-up and stays green when the
	projector is ready to use.
Menu Button	Use to display the On-Screen-Display Menus, which provide
	several options for adjusting the projected image.
Auto Button	Use to auto adjust the image quality.
Source Button	Use to select input source.
Status Button	Use to get projector’s operation status information
L Button	Use as the left mouse button.
R Button	Use as the right mouse button.
↵ Button	Press to enter function.
4 Directional	Use to select or adjust the control items
Selection Buttons
Laser Pointer Button	Use instead of a pointer to activate the laser pointer for use in
	presentations.
Volume +/– Button	Use to adjust the volume of the audio output.
Keystone Button	Use to adjust the image vertically and make it square.
Blank Button	Use to blank the image and mute audio.
Freeze Button	Use to freeze or unfreeze the image
Mute Button	Use to turn on or off the speaker.
Zoom Button	Use the Zoom (+/-) buttons to zoom the image in and out. Use
	the 4 directional selection buttons to pan the image.
Input Source	To select the correct device you are connecting with.
Selection

Power Button