Setup Menu

DLP ™ Digital Projector User’s Guide

PC Mode		Video Mode
Frequency	Use arrow keys Left / Right (W/X) to adjust the sampling clock to
	eliminate flicker.
	Adjustment range: from low-high (0-100) by 31 steps.
	(Default value: auto detected)
Tracking	Use arrow keys Left / Right (W/X) to adjust the sampling number.
	Adjustment range: from low - high (0 – 100) by 100 steps.
	(Default value: auto detected)
Video AGC	Use arrow keys Left / Right (W/X) to adjust the video automatic
	gain control. Selection item: on / off.
	(Default value: on)
Video Type	Use arrow keys Left / Right (W/X) to adjust the video source type.
	Selection item: RGB / Y-Pb-Pr (HD) / Y-Cb-Cr (DVD)
	(Default value: DVD)
Aspect Ratio	Use arrow keys Left / Right (W/X) to select the video aspect ratio.
	Selection item: 4:3 & 16:9. (Default value: 4:3)
Projection Type	Use arrow keys Left / Right (W/X) to select different projection
	type.
	Selection item: Desktop Front/Rear, Ceiling Front/Rear.
	(Default value: desktop front)
Volume	Use arrow keys Left / Right (W/X) to adjust the volume level.
	Adjustment range: from low - high (0-8) by 8 steps.
	(Default value: 4)
Keystone	Use arrow keys Left / Right (W/X) to adjust the keystone level of
	display.
	Adjustment range: from to	(0-100) by 32 steps.
	(Default value: 50)
Reset	Use ↵ button to reset to default value.
	In PC mode to reset aspect ratio, projection type, volume, keystone
	to default value.

In Video mode to reset video AGC, video type, aspect ration, projection type, volume, keystone to default value.