Introduction

The AT-HDMI40SR boosts up your video/audio transmission distance up to 60m/200ft in HDTV 1080i format. With only one cost effective CAT-5/5e cable, users can readily extend HDTV sources from DVD players, PS3, PC, or any other kind of HDCP compliant source, to any remote display includ- ing HDMI/DVI enabled TV set LCD, or monitor. This cost effective solution allows HDCP compliant sources and players to transmit high quality video and audio at greater distances.

The AT-HDMI40SR includes two units: transmitting and receiving units. The transmitting unit is used to capture the input HDMI/DVI signals and carry the signals through one RJ-45 connector into one CAT-5/5e/6 cable. The receiving unit is responsible for equalizing the sent TMDS multimedia data. The transmission distance between the sending and receiving units can be up to 60m/200ft at 1080i and 40m/130ft at 1080p. With the equaliza- tion control switch on the receiving unit, users can adjust the equalization strength to the received TMDS signals, and therefore optimize the trans- mission distance between source and destination.

FEATURES

•HDMI 1.2a compliant

•Extend the signal distance of an HDMI source up to 60m/200ft at 1080i or 720p

•Extend the signal distance of an HDMI source up to 40m/130ft at 1080p

•HDCP compliant

•Minimize the cable skew by adjustable 8-level equalization knob