" ,. ..\ f
ICruise | Control | Switch | Installation | I | ,.' | """;,,,! |
'i'
..
If your Cruise Control switch is the type which clamps on the turn signal lever, req~ cutting the turn signalJever, or is
mounted on the instrument panel, follow instructions pack~~with it If you have a switch which replaces the cpntplete original equipment turn signal lever, remove the existing lever and install the Cruise Control switch and lever assembly as instructed in the vehicle shop servire manual.
I WIRING | A Tf ACHMENTS | TO | VEH | "~ ' ' | c"; |
To find | a place to get electrical power | you will | need to "ground" one lead of your test light or | el~cal |
ground by turning on the ignition switch and touching one lead to a 11«fused tenninal at fuse pan~l; toucbc~r lead to
unpainted metal part of vehicle. The metal you touch, if it makes (X)ntinuity, is ~d. Bracket for parking brake lever is usually a good ground. Turn ignition switch off.
NOTE: Somefuse panels are behind shields which must be removed first. On other vehicles the screw that mounts the panel must be removed to get to the fuses.
~..:
~
WIREFUNCTION
ICOLOR
~
BLACK GROUND
-
BROWNACCESSORYPOWER
-
WCATION
|
|
| - |
Vehicle | puMIlM>int | which is a clean ~nted | metal |
surface |
| , |
|
NOTE: 00 NOr USE mE ENGINE AS A GROUNDING POINT. 00 Nor CONNECf TO mE
EXTENSION BRACKET
~~-
F~ panel: fuse that bas + 12 volts when key is ON and O wits when key is OFF or in the ST ART (CRANK) position.
RED
CONSTANT | POWER | Hot side of brake switch |
VIOLETGROUND
BLUE TACHOMETER
Cold side of brake switch
I | wits or open resistancewhen brake is | |
|
| |
See v~ | TdlliCGIl,,/ormlltioll | G,,- (FOnD #2482) |
! or
| consult | Vehicle | Shop Manual |
| |
GRAY. | VEHICLE SPEEDSENSOR | See V~ | TdlliCGIl"/omultio,, | G"ide (FOnD #2482) | |
|
| or |
|
|
|
|
| Vehicle | Shop Manual |
| |