Daewoo DRHT-630 manual Digital Audio, Front AV, Bitstream

Jack Panel of Accessory Component

(VCR, Analog Camcorder, etc.)

0202DRHT-630 2007.2.2 9:19 AM ˘ ` 30

Setup menu

Digital Audio

1Press [SETUP].

2Use [œ/√] to select ‘Preferences‘.

3Whilst ‘Preferences‘ is selected, press [†] to select ‘Digital Audio‘.

4Use [œ/√] to select the desired digital output type.

5Press [SETUP] to exit the menu.

Front AV

1Follow steps 1-2 as shown under ‘Digital Audio’.

2Use […/†] to select ‘Front AV’.

3Use [œ/√] to select the desired Front AV type.

4Press [SETUP] to exit the menu.

CVBS : When you select this signal mode, you can use an audio/video cord to connect other equipment.

•Off

No signal will be output from the Digital Audio Out jacks.

•PCM

Select when connected to a 2 channel digital stereo amplifier. The DVB-T HDD/DVD Recorder's digital audio signal will be output in the PCM 2ch format when you play a DVD recorded with a Dolby Digital (only for DVD) or MPEG soundtrack. If the DVD is recorded with a DTS sound track then no sound will be heard.

•Bitstream

Front of DVB-T HDD/DVD Recorder

S-VIDEO :When you select this signal mode, you can use an S-VIDEO cord to connect other equipment. N.B. S-video does not include audio.

Jack Panel of Accessory Component

(VCR, Analog Camcorder, etc.)

Select when connected to a Dolby Digital or DTS decoder (or an amplifier or other equipment with a Dolby Digital or DTS decoder).

Front of DVB-T HDD/DVD Recorder

30