Motorola DCX3501M Above and below the picture when possible, All four sides, Picture 480p, Noise

Page 57

Troubleshooting

B

Problem

Possible Solution

 

 

picture

Turn on the 4:3 OVERRIDE feature in the User Settings menu. This enables most standard

 

screen TVs to display a full screen picture when the DCX set-top is tuned to a 4:3 program.

 

Set the TV TYPE to 4:3 Pan-Scan. This enables the DCX set-top to remove the black bars

 

above and below the picture when possible.

 

Some SD programs are broadcast in the letterbox format with black bars above and below

 

the picture. Some widescreen TVs offer a zoom feature that may be able to remove the

 

black bars (see your TV manual for information about zooming 4:3 video).

 

 

There are black bars on

This may occur on a 4:3 TV if the 4:3 OVERRIDE setting is OFF. To set 4:3 SD programming

all four sides of the

to fill the screen, depending on the capabilities of the TV, set 4:3 OVERRIDE to 480i or

picture

480p.

 

This may occur on a 16:9 TV if the active video for an SD broadcast is in letterbox format.

 

To confirm, wait for a commercial or look for a graphic, such as a network logo. If the

 

commercial fills the screen from top to bottom, or the graphic appears below the active

 

video, the program is being letterboxed by the broadcaster. You can minimize this by

 

activating the zoom feature on the TV.

 

A broadcaster may include black bars on either side of a wide screen broadcast. This is

 

called a “hybrid” aspect ratio and results in a black border surrounding the video on a 4:3

 

TV. Because this is part of the broadcast, the DCX set-top cannot correct the video. You

 

may be able to minimize the border using the zoom feature on the TV.

 

 

Colors do not appear

Be sure to match up each signal to the same YPbPr connection on the TV, otherwise the

correctly

colors will not appear correctly on your TV.

 

 

The DCX set-top is

The DCX set-top includes an integrated hard drive and a fan for cooling. During normal

making a humming

operation, the DCX set-top emits a low humming noise, similar to a personal computer.

noise.

The noise varies in volume occasionally when the speed of the internal fan adjusts to

 

changes in the temperature around the DCX set-top. Please note the hard drive will stay

 

on even when the DCX set-top is turned off (standby).

 

 

High-Definition All-Digital Dual Tuner DVR Set-top DCX3501–M • User Guide

48

365-095-16095-x.2

 

Image 57
Contents DCX3501-M Page During Transportation to the Subscriber Home Safety & Regulatory InformationFCC Compliance During InstallationRecycling your Motorola Equipment FCC Declaration Of ConformitySoftware License Government Restricted Rights Contents Configuring A/V, Closed Captioning, and Other Settings Data Devices Data Features On-Screen GraphicsTroubleshooting Recording Your ConnectionsOverview 1IntroductionFront Panel Rear Panel IEEE-1394 Audio and video device connection Power connectorAdjusting the Volume Turning Power On and OffChanging Channels Interactive Program GuideOperation Front Panel Format ButtonCard Digital Video Recorder DVR Page Using the External DVR Expansion Feature Video Connection Options Connecting Your DCX Set-topComponent video YPbPr Hdtv and Sdtv Cable Connecting Hdtv Single Connection for Video/AudioConnecting Your DCX Set-top DVI Connecting Hdtv Separate Video/Audio ConnectionsConnecting Your DCX Set-top to an Hdtv Separate Video/Audio Connecting an A/V Receiver Audio Connecting Your DCX Set-top to an Hdtv Alternate Audio Connecting an Sdtv Connecting Your DCX Set-top to an Sdtv Connecting Your DCX Set-top DCX 3501-M Connecting an A/V Receiver, SDTV, and VCR/DVD Recorder Connecting Your DCX Set-top Connecting Your Set-top to an External eSATA DVR Recording Your Connections Data Devices Data FeaturesOn-Screen Graphics Configuring A/V, Closed User Settings Menu Main Screen Page User Settings Menu Main Menu Screen Description Override SettingsNative ModeCaption Advanced Audio/Vide SettingsSubtitle DVSNative Mode Settings menu screen Native Mode Settings ScreenHigh Definition 1080p601080p30 High Definition 1080p24 High DefinitionNative Settings Restore Default480i Standard Definition ValuesAdditional Hdmi Settings screen Additional Hdmi Settings ScreenHDMI/DVI Mode ReceiverColor Space Lip Sync DelayAudio Output Lip SyncAdditional Closed Caption Settings Screen Additional Closed Caption Settings menu screenHdmi Settings Setting is Auto Or 6. The default setting is Primary LanguageCC Settings Option and press the key CC1Subtitle and DVS Settings Menu Screen Subtitle and DVS Settings ScreenSubt/DVS Settings Press the key Descriptive Video ServiceSubtitles LanguageAdvanced Audio/Video Settings Menu Screen Advanced Audio/Video Settings ScreenDolby Volume Menu Restore Default A/VVideo Sharpness Remote control to restore sound Press the Power buttonDCX set-top will TV has not been pressedUser Settings menu Display Verify that closed captions are enabled on the TVSet-top Logic, Dolby Pro Logic II, Dolby Pro LogicActivating the zoom feature on the TV Above and below the picture when possibleOn even when the DCX set-top is turned off standby All four sidesMotorola Mobility, Inc