Dell 6.2 manual Updating a Vlan Pool, Deleting a Vlan Pool, Creating a Vlan Pool Using the CLI

If a VLAN pool is given an Even assignment and is assigned to user roles, user rules, VSA or a server derivation rules, then while applying VLAN derivation for the client “on run time,” the Even assignment is ignored and the Hash assignment is applied with a message displaying this change.

NOTE: L2 Mobility is not compatible with the existing implementation of the Even VLAN pool assignment type.

Updating a VLAN Pool

1.On the VLAN Pool window, click Modify next to the VLAN name you want to edit.

2.Modify the assighment type and the list of VLAN IDs. Note that you can not modify the VLAN name.

3.Click Update.

4.Click Apply.

5.At the top of the window, click Save Configuration.

Deleting a VLAN Pool

1.On the VLAN Pool window, click Delete next to the VLAN name you want to delete. A prompt appears.

2.Click OK.

3.Click Apply.

4.At the top of the window, click Save Configuration.

Creating a VLAN Pool Using the CLI

NOTE: VLAN pooling should not be used with static IP addresses.

This example creates a VLAN pool named mygroupthat has the assignment type even.

(host) (config) #vlan-name mygroup pool assignment even

Viewing and Adding VLAN IDs Using the CLI

The following example shows how to view VLAN IDs to a VLAN pool:

(host) #configure terminal

Enter Configuration commands, one per line. End with CNTL/Z (host) (config) #show vlan

VLAN CONFIGURATION

------------------

VLAN Description Ports

--------------- -----

1	Default	FE1/0-3 FE1/6 GE1/8
2	VLAN0002

4VLAN0004

12VLAN0012

210VLAN0210

212	VLAN0212	FE1/5
213	VLAN0213	FE1/4
1170	VLAN1170	FE1/7
1170	VLAN1170	FE1/7

Dell PowerConnect W-Series ArubaOS 6.2 User Guide Network Configuration Parameters 112