Dell 6.2 manual Enable multicast shaping on the firewall, Enable Igmp Proxy

WMM Traffic management profile "default"

----------------------------------------

Parameter	Value
Enable---------Shaping Policy	-----
	true
Voice Share	20	%
Video Share	50	%
Best-effort Share	20	%
Background Share	10	%

After you configure the WMM bandwidth management profile, apply it to the virtual AP profile.

(config) #wlan virtual-ap default

(Virtual AP profile "default") #wmm-traffic-management-profile default

9.Enable multicast shaping on the firewall.

(host) (config) #firewall shape-mcast

(host) (config) #show firewall

Global firewall policies
------------------------	Action	Rate	Slot/Port
Policy
------	------	----	---------
Enforce TCP handshake before allowing data	Disabled
Prohibit RST replay attack	Disabled
...
...	Enabled
Multicast automatic shaping
Clear Sessions on Role Update	Disabled
Session mirror IPSEC	Disabled

In the WebUI

1.Enable IGMP proxy or IGMP snooping on the controller. To enable IGMP proxy:

a.Navigate to the Configuration > Network > IP page. Under the IGMP settings, select the Enable IGMP checkbox.

b.Select the Proxy checkbox and select the appropriate value from the Interface drop down menu.

c.Click the Apply button to apply the settings and save the configurations.

Figure 288: Enable IGMP Proxy

To enable IGMP snooping:

a.Navigate to the Configuration > Network > IP page. Under the IGMP settings, select the Enable IGMP checkbox.

b.Select the Snooping checkbox.

c.Click the Apply button to apply the settings and save the configurations.

691 Voice and Video Dell PowerConnect W-Series ArubaOS 6.2 User Guide