a. Select theA AA profile fromt heprofile list to display the list of authentication and accounting profiles
associated with the AAA profile.
b. Selectthe Radius Accounting Serv er Group profile associated with the AAA profile.Click the RADIUS
Accounting Server Gr oupdrop-down list to select a RADIUS servergroup. (For more information on
configuringa R ADIUS server or server group,see "Configuringa RAD IUS Server"on page 1 69.)
c. To enableR ADIUS Interim Accounting, select the AAA profile name from the profilelist, then click the
RADIUS Interim Accounting checkbox. This optio n is disabled by default, allowingt hec ontrollerto s end
only

start

and

stop

messages RADIUS accounting server.
5. ClickApply.
If you need to create an authentication server group, select new and enter the appropriate parameters.

Inthe CLI

aaa profile <name>
authentication-dot1x <dot1x-profile>
dot1x-default-role <role>
dot1x-server-group <group>
radius-accounting <group>
radius-interim-accounting
Configuring the T unneling V irtual AP Profile
In the WebUI
1. Navi gate to Configuration >Wireless >AP Configuration page. Select either theA P Groupor AP Specific
tab. Click Edit forthe applicable AP group nameo rAP name.
2. Under Profiles, select Wireless LAN, then Virtual AP.
3. To create a new virtual AP profile in the WebUI, select New from the Add a profile drop-down menu. Enter the
namefor t he virtual AP profile, and click Add.
NOTE:Whenever you create a new virtual AP profile i n theW ebUI,the profile automatical ly containsthe “default” SSID profile with
thedefault ESSID. You must configure a new ESSID and SSID profile for the virtual AP profile before you apply the profile.
a. In the Profile Details entry, go to the AAA Profile drop-down list and select the previously configuredAAA
profile.The AA A Profile pop-up window appears.
b. To set the AAA profile and close the window, click Apply.
c. In the Profile Details entry for the new virtualAP profile, select NEWfrom the SSID Profile drop-down
menu.A pop-up window displays to allow you to configure theSSID profile.
d. Enter the name for the SSID profile.
e. UnderNetwo rk,enter a name in t he Network Name (SSID) field.
f. Under Security, select the network authentication and encryption methods.
g. To set the SSID profile and close the window, clickA pply.
4. Click A pplyat the bott om of the Profile Details window.
5. Click the new virtual AP name in the Profiles list or the Profile Details to display configuration parameters.
6. Under Profile Detai ls:
a. Makes ureVi rtualA P enable is selected.
b. From the VLAN drop-down menu, select the VLAN ID for t he VLAN to be used for split tunneling.
c. From the Forward mode drop-down menu,select split-tunn el.
d. Click Apply.
DellPowerConnect W- Series ArubaOS 6.2 | User Guide RemoteAccessPoints | 540