Dell 6.2 manual Configuring Policies and Roles in the CLI, Creating an Auth-Guest Role

10.Under Firewall Policies, click Add.

11.For Choose from Configured Policies, select block-internal-access from the drop-down menu.

12.Click Done.

13.Click Apply.

Creating an Auth-Guest Role

To create the guest-logon role via the WebUI:

1.Navigate to the Configuration > Security > Access Control > User Roles page.

2.Click Add.

3.For Role Name, enter auth-guest.

4.Under Firewall Policies, click Add.

5.For Choose from Configured Policies, select cplogout from the drop-down menu.

6.Click Done.

7.Under Firewall Policies, click Add.

8.For Choose from Configured Policies, select guest-logon-access from the drop-down menu.

9.Click Done.

10.Under Firewall Policies, click Add.

11.For Choose from Configured Policies, select block-internal-access from the drop-down menu.

12.Click Done.

13.Under Firewall Policies, click Add.

14.For Choose from Configured Policies, select auth-guest-access from the drop-down menu.

15.Click Done.

16.Under Firewall Policies, click Add.

17.For Choose from Configured Policies, select drop-and-log from the drop-down menu.

18.Click Done.

19.Click Apply.

Configuring Policies and Roles in the CLI

Defining a Time Range

To create a time range via the command-line interface, access the CLI in config mode and issue the following commands:

(host)(config) #time-range working-hours periodic weekday 07:30 to 17:00

Creating Aliases

To create aliases via the command-line interface, access the CLI in config mode and issue the following commands:

(host)(config) #netdestination “Internal Network” network 10.0.0.0 255.0.0.0

network 172.16.0.0 255.255.0.0 network 192.168.0.0 255.255.0.0

(host)(config) #netdestination “Public DNS” host 64.151.103.120

host 216.87.84.209

244 Captive Portal Authentication Dell PowerConnect W-Series ArubaOS 6.2 User Guide