Dell 6.2 manual Interval Seconds, and the default value is 30 seconds, Count, Requests, Framed MTU

Parameter

Description

Advanced 802.1x Authentication Settings

Machine Authentication	The timeout, in hours, for machine authentication. The allowed range of values is 1-1000
Cache Timeout	hours, and the default value is 24 hours.
Blacklist on Machine	Select the Blacklist on Machine Authentication Failure checkbox to blacklist a client if
Authentication Failure	machine authentication fails. This setting is disabled by default
Interval between Identity	Interval, in seconds, between identity request retries. The allowed range of values is 1-65535
Requests	seconds, and the default value is 30 seconds.
Quiet Period after Failed	The enforced quiet period interval, in seconds, following failed authentication. The allowed
Authentication	range of values is 1-65535 seconds, and the default value is 30 seconds.
Reauthentication Interval	Interval, in seconds, between reauthentication attempts. The allowed range of values for this
	parameter is 60-864000 seconds, and the default value is 86400 seconds (1 day).
Use Server provided	Select this option to override any user-defined reauthentication interval and use the
Reauthentication Interval	reauthentication period defined by the authentication server.
Multicast Key Rotation	Interval, in seconds, between multicast key rotation. The allowed range of values for this
Time Interval	parameter is 60-864000 seconds, and the default value is 1800 seconds.
Unicast Key Rotation Time	Interval, in seconds, between unicast key rotation. The allowed range of values for this
Interval	parameter is 60-864000 seconds, and the default value is 900 seconds.
Authentication Server Retry	Server group retry interval, in seconds. The allowed range of values for this parameter is 5-
Interval	65535 seconds, and the default value is 30 seconds.
Authentication Server Retry	Maximum number of authentication requests that are sent to server group.
Count	The allowed range of values for this parameter is 0-3 requests, and the default value is 2
	requests.
Framed MTU	Sets the framed Maximum Transmission Unit (MTU) attribute sent to the authentication server.
	The allowed range of values for this parameter is 500-1500 bytes, and the default value is 1100
	bytes.
Number of times ID-	Maximum number of times ID requests are sent to the client. The allowed range of values for
Requests are retried	this parameter is 1-10 retries, and the default value is 3 retries.
Maximum Number of	Number of times a user can try to login with wrong credentials after which the user is
Reauthentication Attempts	blacklisted as a security threat. Set to 0 to disable blacklisting, otherwise enter a value from 0-
	5 to blacklist the user after the specified number of failures.
	NOTE: If changed from its default value, this may require a license This option may require a
	license.
Maximum number of times	Number of consecutive authentication failures which, when reached, causes the controller to
Held State can be bypassed	not respond to authentication requests from a client while the controller is in a held state after
	the authentication failure. Before this number is reached, the controller responds to
	authentication requests from the client even while the controller is in its held state.
	(This parameter is applicable when 802.1X authentication is terminated on the controller, also
	known as AAA FastConnect.) The allowed range of values for this parameter is 0-3 failures,
	and the default value is 0.
Dynamic WEP Key	Set the Number of times WPA/WPA2 Key Messages are retried. The allowed range of values
Message Retry Count	is 1-5 retries, and the default value is 3 retries.

197 802.1X Authentication Dell PowerConnect W-Series ArubaOS 6.2 User Guide