Dell 6.2 Figure 211: , Table21 2:

591| Spectrum Analysis DellPowerConnect W- Series ArubaOS 6.2 | User Guide
Figure 211: ChannelMetrics Trend Chart
Table2 12 describes the other parametersthat can be displayed in the Channel Metrics Trend output. Clickt he
down arrow in the upperright corner of this chart then click the Options menu to access these configuration
settings. Once you have configuredthe desired parameters, click OK at the bottom of t heOptions menu to save
your settings and returnt o the spectrum dashboard.
Parameter Description
Band Radio band displayed in this graph (2.4GHz or 5 GHz).
Show Trend for Last Bydefault, the Channel Quality Trend chart shows channel quality or channel availabil ityfor
thepast 10 minutes. To view data for a different time range, click the Show Trend for Last
drop-down list and selectone of the followi ng options:
l10minutes
l30minutes
l1hour
Channel numbering Forspectrum moni torsusing the 5 GHz radio band, select either 20 MHz or 40 MHz channel
numbering to identifya channel numbering scheme for the graph.
NOTE:Thi s parameter is not configurable for graphs created by hybrid APs or spectrum
monitor radios that use the2. 4 GHzr adio band. A hybrid AP on a 20 MHz channel sees 40 MHz
Wi-Fi dataas non-Wi-Fi data.
Show Lines for These
Channels
TheChannel Quality Trend chart for a spectrumm onitor can display channel quality, channel
availability or channel utilization values for up to five differentchannel son the selected radio
band. Chartsfor hybrid APs can display data for the one channel monitored by that hybrid AP
radio.
Tochoose whi ch typeof data each line should represent on a chart for a spectrum monitor,
click thechannel number drop-down list and select a channel within the radio band, then
click thesecond drop-down l istand select either Channel Quali ty,or Channel Availabi lity.
Selectthe checkbox beside each channel entry to show that information on the chart, or
unselectthe checkbox to hide that information.
Table21 2: ChannelMetrics TrendOptions