Dell 6.2 Managin g Profiles In the C LI

458| Secure Ente rprise Mesh DellPowerConnect W- Series ArubaOS 6.2 | User Guide
Editing a Profile
1. N avigate to the Configuration > Wireless > AP Configuration window. Select either the AP Group or AP
Specific tab.
lIf you selected the AP Group tab, click the Edit button by the AP group name with the profile you want to
edit.
lIf you selected the AP Specific tab, click the Edit button by the AP with the profile you want to edit.
2. I n the Profileslist ,expand the Meshmenu, then select Mesh High-throughputSSID profile.
3. I n the Profile Details window pane, click the Mesh High-throughput SSID profile drop-down list and select the
nameo f the profiley ou want to edit.
4. Change the setti ngs as desired.Table 136 describes the parameters you can configure in this profile.
5. Click A pplyto save your changes.
Deleting a Profile
You can delete a mesh high-throughputSSID profile only if no A Ps or AP groups are associated wi th that profile.
1. N avigate to the Configuration > Advanced Services> All Profiles window.
2. E xpandthe Meshmenu, then select Mesh High-throughputSSID prof ile. A list of high-throughputSSID profiles
appearsi n the Profile Details window pane.
3. Click t he Delete button by the name of the profileyou want to delete.
Managin g Profiles In the C LI
You must be in config mode to create, modify or delete a mesh radio profile using the CLI. Specify an existing high-
throughputSSID profile wit h the <profile-name>parameter to modify an exist ing profile,or enter a new name to
create an entirely new profile.
Creating or Modifying a Profile
Configuration details and any defaultvalues for each of these parameters are described in Table 136. I f you do not
specify a parameter for a new profile, that profile uses the default valuefor that parameter.Put the no option before
any parameterto remove the current valuefor that parameterand return it to its default setting. Enter exit to leave
the high-throughputradio profile mode
(host)(config) #ap mesh-ht-ssid-profile <profile-name>
40MHz-enable
clone
high-throughput-enable
ldpc
legacy-stations
max-rx-a-mpdu-size
max-tx-a-mpdu-size
min-mpdu-start-spacing
mpdu-agg
no
short-guard-intvl-20mhz
short-guard-intvl-40mhz
stbc-rx-streams
stbc-tx-streams
supported-mcs-set
temporal-diversity
You can also create a new mesh high-throughputSSID profile by copying the settings of an existi ngprofile using the
clone parameter.Using the clone command to create a new profilemakes it easier to keep constant attributes in
common within multiple profiles.