Dell 6.2 Configuring Mobility usi ng the WebUI

Figure 152: Example Configuration:Campus-Wide
This exampleuses the “default” mobility domain for the campus-wide roaming area. Since allDell controllers are
initially includedi nt hedefault mobility domain, you do not need to explicitly configure “default” as the active
domain on each controller.
Configuring Mobility usi ng the WebUI
Onco ntrollerA (the master co ntroller):
1. Navigate to the Configuration >Advanced Services >IP Mobility page.
2. Select theEn able IPMobility checkbox.
3. Select the“ default”domain in the Mobility D omain list.
4. Click Add underthe Subnet column. Enter the subnetwork, mask, VLAN ID, home agent IP address, and a
description for the first entry shown below and click Add. Repeat this step foreach HAT entry.
Subnetwork Mask VLAN ID Home AgentAddress orVRIP
10.1.1.0 255.255.255.0 1 10.1.1.245
10.1.1.0 255.255.255.0 1 10.2.1.245
10.1.2.0 255.255.255.0 2 10.1.1.245
10.1.3.0 255.255.255.0 3 10.1.1.245
10.2.1.0 255.255.255.0 4 10.2.1.245
10.2.2.0 255.255.255.0 5 10.2.1.245
10.2.3.0 255.255.255.0 6 10.2.1.245
10.3.1.0 255.255.255.0 7 10.3.1.245
10.3.2.0 255.255.255.0 8 10.3.1.245
10.3.3.0 255.255.255.0 9 10.3.1.245
Table15 3: Exampleentries
5. Click Apply.
DellPowerConnect W- Series ArubaOS 6.2 | UserGuide IPMobility | 496