Dell 6.2 Configuring M ixed Authenticatio n Modes

219| 802.1X Auth entication DellPowerConnect W- Series ArubaOS 6.2 | User Guide
10. Click on the WLAN-01_second-floor virtual AP profile name in the Profiles list or in Profile Details t o display
configuration parameters.
a. Makes ureVi rtualA P enable is selected.
b. For V LAN, select 61.
c. Click Apply.
In the CLI
(host)(config) #wlan ssid-profile WLAN-01
essid WLAN-01
opmode wpa-tkip
(host)(config) #wlan virtual-ap WLAN-01_first-floor
vlan 60
aaa-profile aaa_dot1x
ssid-profile WLAN-01
(host)(config) #wlan virtual-ap WLAN-01_second-floor
vlan 61
aaa-profile aaa_dot1x
sid-profile WLAN-01
(host)(config) #ap-group first-floor
virtual-ap WLAN-01_first-floor
(host)(config) #ap-group second-floor
virtual-ap WLAN-01_second-floor
Configuring M ixed Authenticatio n Modes
Use l2-auth-fail-through commandt o performmixed authenticatio n which includesbot h MAC and 802.1x
authentication. WhenMAC authentication fails, enable the l2-auth-fail-through commandt o perform802 .1x
authentication.
NOTE:By default the l2-auth-fail-through command is disabled.
Authentication 1 2 3 4 5 6
MACauthentication Success Success Success Fail Fail Fail
802.1x
authentication
Success Fail — Success Fail —
Association dynamic-wep No
Association
static-wep dynamic-
wep
No
Association
static-wep
Role Assignment 802.1x — MAC 802.1x — logon
Table64 : MixedAuthentication Modes
Table6 4 describes the differentauthenticati on possibilities
In the CLI
(host)(config) #aaa profile test
l2-auth-fail-through