Dell 6.2 Configuring the Non-Gue st WLANs

2. In the AP Group list, click Edit for first-floor.
3. UnderP rofiles,select Wireless LAN, then selectV irtualAP.
4. To create the guest virtual AP:
a. Select NEW from the Add a profile drop-down menu. Enter guest, and click Add.
b. In the ProfileD etails entry fort heguest virtual AP profile, select NEW from the SSID profile drop-down
menu.A pop-up window allows you to configure the SSID profile.
c. For the name for theSSID profileenter guest.
d. Fort heNet workName for the SSID, enter guest.
e. For Network Authentication, select None.
f. For Encryption, select WEP.
g. Enter the WEP Key.
h. ClickApply to apply the SSID profile to the Vi rtualAP.
i. Under Profile Detai ls,c lick Apply.
5. Click on the guest virtualA P name in the Profiles list or in Profile Detai ls to display configuration parameters.
a. Make sure Virtual AP enable is selected.
b. ForV LAN, select 63.
c. Click Apply.
6. Navigate to the Configuration > Wireless > AP Conf iguration page.
7. In the AP Group list, click Edit for the second-floor.
8. In the Profileslist, select Wireless LAN, then select VirtualA P.
9. Select guestfrom the Add a profile drop-downmenu. Click Add.
10. Click Apply.
In the CLI
(host)(config) #wlan ssid-profile guest
essid guest
wepkey1 aaaaaaaaaa
opmode static-wep
(host)(config) #wlan virtual-ap guest
vlan 63
ssid-profile guest
(host)(config) #ap-group first-floor
virtual-ap guest
(host)(config) #ap-group second-floor
virtual-ap guest
Configuring the Non-Gue st WLANs
You create andco nfigurethe SSID profile “WLAN-01” w ith the ESSID “WLAN-01” and WPA TKIP encryption.
You needt o create and configuretwo virtualAP profiles: one with VLAN 60 for the first-floor AP group and the
other with VLAN 61 for the second-floor AP group. Each virtual AP profile referencesthe SSID profile “WLAN-01”
and the previously-configuredAAA profile “aaa_dot1x”.
In the WebUI
1. Navigate to the Configuration > Wireless > AP Conf iguration page.
2. In the AP Group list, click Edit for the first-floor.
DellPowerConnect W- Series ArubaOS 6.2 | UserGuide 802.1XAuthentication | 212