Dell 6.2 Creating a Vlan Pool, Using the WebUI, This example assigns a Vlan name in a virtual AP

Figure 28: Named VLAN not in a Pool

6.In the List of VLAN IDs field, enter the VLAN ID you want to name. If you know the ID, enter the ID. Or, click the drop-down list to view the IDs then click the <--arrow to add the ID to the pool.

7.ClickApply.

In the CLI

This example assigns a name to an existing VLAN ID.

(host) (config) #vlan-name myvlan

(host) (config) #vlan myvlan 94

This example assigns a VLAN name in a virtual AP:

(host) (config) #wlan virtual-ap default vlan mygroup

This example assigns a VLAN name in a wired profile for access VLAN:

(host) (Wired AP profile "default") #switchport access vlan mygroup

This example assigns a VLAN name in a wired profile for a trunk VLAN and an allowed VLAN.

(host) (Wired AP profile "default") #switchport access vlan mygroup

(host) (config) #ap wired-ap-profile default switchport trunk ?

allowed	Set allowed VLAN characteristics when interface is
native	in trunking mode
	Set trunking native characteristics when interface
	is in trunking mode

(host) (config) #ap wired-ap-profile default switchport trunk native vlan mynativevlan

(host) (config) #ap wired-ap-profile default switchport trunk allowed vlan myallowedvlan

Creating a VLAN Pool

You can create, update and delete a VLAN pool. Each VLAN pool has a name and needs to have one or more VLANs assigned to it. The following configurations create a VLAN Pool named mygroup, it has the assignment type Even, and VLAN IDs 2, 4 and 12 are to this pool.

Using the WebUI

1.Navigate to Configuration > Network > VLANs.

2.Select the VLAN Pool tab to open the VLAN Pool window.

3.Click Add.

4.In the VLAN Name field, enter a name that identifies this VLAN pool.

Dell PowerConnect W-Series ArubaOS 6.2 User Guide Network Configuration Parameters 110