Dell 6.2 Creating an Block-Internal-Access Poli cy

242| Captive Port al Authentication DellPowerConnect W- Series ArubaOS 6.2 | User Guide
5. U nderRules, select Add to add rulesfor the policy.
a. UnderSource, select user.
b. Under Desti nation, select any.
c. UnderService, select udp. Enter 68.
d. Under Actio n,s elect drop.
e. Click Add.
6. U nderRules, click Add.
a. UnderSource, select any.
b. Under Desti nation, select any.
c. UnderService, select ser vice.Select svc-dhcp.
d. Under Actio n,s elect permit.
e. UnderTime Range, select working-hours.
f. Click Add.
7. U nderRules, click Add.
a. UnderSource, select user.
b. Under Desti nation, select alias. Select PublicDNS from the drop-down menu.
c. UnderService, select ser vice.Select svc-dns.
d. Under Actio n,s elect src-nat.
e. UnderTime Range, select working-hours.
f. Click Add.
8. U nderRules, click Add.
a. UnderSource, select user.
b. Under Desti nation, select any.
c. UnderService, select ser vice.Select svc-http.
d. Under Actio n,s elect src-nat.
e. UnderTime Range, select working-hours.
f. Click Add.
9. U nderRules, click Add.
a. UnderSource, select user.
b. Under Desti nation, select any.
c. UnderService, select ser vice.Select svc-https.
d. Under Actio n,s elect src-nat.
e. UnderTime Range, select working-hours.
f. Click Add.
10. Click Apply.
Creating an Block-Internal-Access Poli cy
To create the block-internal-accesspolicy via the WebUI:
1. N avigate to the Configuration > Security > Access Contro l > Policies page.
2. Select Add to add the block-internal-access policy.
3. Fo r Policy Name, enter block-internal-access.
4. Fo r Policy Type, select IPv4 Session.