10. LED | - REC | : The LED will blink when the system is in the recording mode. |
FUNCTION | - PLAY | : The LED will blink when the system is in the replaying mode. |
| - TIMER | : When the SCHEDULE RECORD is set, the LED will blink |
|
| before it starts RECORDING. |
| - ALARM | : The LED is lit when ALARM is set. |
| - HDD FULL : The LED is lit when the space of HDD is less than 1GB. If | |
|
| HDD OVERWRITE is set, the LED won’t be lit even though |
|
| the space of HDD is less than 1GB. |
| - POWER | : The LED is lit when the POWER switch is on. |
11. REC | - Press this button to starts Continuous Recording. | |
| - Press and hold this button for about 3 seconds to stop Recording. | |
12. USB PORT | - Save playback data or connect an USB Memory for updating Firmware. | |
13. OSD / | - Press this button to turn the OSD (On Screen Display) on. Press this | |
ALRST | button again to turn the OSD off (Except “PLAY” and “REC” sign). | |
| - Press this button to reset the system when Alarm or Motion event occurs. | |
14. SETUP / | - Press this button in the LIVE mode, the SETUP menu will be displayed. | |
PTZ | - Press and hold this button for about 3 seconds, the PAN/TILT menu will | |
| be displayed. Press the STOP/ESC button to return to the QUAD mode. | |
15. SEARCH / | - Press this button in the LIVE mode, the SEARCH/HDD SET menu will | |
| display on the screen. | |
| - Press and hold this button for about 3 seconds in the LIVE mode, the | |
| SYSTEM LOG menu will display on the screen. | |
| - SYSTEM LOG Information. | |
| ||
| ||
| ||
| ||
| ||
| ||
| PWR : It indicates when the system was powered on. | |
| USB : It indicates when the system saved data on the USB memory. | |
| - It will create upto 300 log lists. | |
16. BACKUP / | This button is used to backup data on USB memory. | |
WTMK | HOW TO BACKUP DATA ON USB | |
| - Format the USB with your computer and plug it on USB PORT (See #12). | |
| - Press this button when the system is in the playback mode. | |
| - It will start to copy recorded data from your DVR right after displaying | |
| “ PLEASE WAIT…”. | |
| - Press this button again to stop copy. | |
| - It will stop to copy after displaying “ PLEASE WAIT…, COPY OK”. | |
|
|
|
- 07 -