5.5.6.1 IP MODE
•Choose the IP MODE in the IP CONFIGURATION menu with the UP/DOWN buttons.
•Choose DYNAMIC IP or STATIC IP by pressing the ENTER button.
DYNAMIC IP: The IP is automatically allocated via router. Therefore the IP address, subnet mask and gateway address will be automatically allocated.
STATIC IP: This has to be set when the STATIC IP is used. The subnet mask and gateway address has to be set as well.
5.5.6.2 IP ADDRESS
•Choose the IP ADDRESS in the IP CONFIGURATION menu with the UP/DOWN buttons and press the ENTER button.
•Select the digits by using the LEFT/RIGHT buttons and change the values with the UP/DOWN buttons.
•After completing, press the ENTER button to apply the IP ADDRESS setting to the system.
5.5.6.3 SUBNET
•Choose the SUBNET in the IP CONFIGURATION menu with the UP/DOWN buttons and press the ENTER button.
•Select the digits by using the LEFT/RIGHT buttons and change the values with the UP/DOWN buttons.
•After completing, press the ENTER button to apply the SUBNETMASK setting to the system.
5.5.6.4 GATEWAY
•Choose the GATEWAY in the IP CONFIGURATION menu with the UP/DOWN buttons and press the ENTER button.
•Select the digits by using the LEFT/RIGHT buttons and change the values with the UP/DOWN buttons.
•After completing, press the ENTER button to apply the GATEWAY setting to the system.
5.5.6.5 PORT
•The PORT is the TCP address of the program, which is used to connect to the network viewer and has a range of 0000 to 9999.
•Choose the PORT in the IP CONFIGURATION menu with the UP/DOWN buttons and press the ENTER button.
•Select the digits by using the LEFT/RIGHT buttons and change the values with the UP/DOWN buttons.
•After completing, press the ENTER button to apply the PORT setting to the system.
- 28 -