•To apply the setting, press the ENTER button.
5.5.1.3 DATE FORMAT
•Choose the DATE FORMAT in the TIME /DATE SET menu with the UP/DOWN buttons.
•Select the DATE FORMAT by pressing the ENTER button.
There are three formats to display the time and date as follows.
MM / DD / YYYY: For U.S.A.
YYYY/ MM / DD: For Asian Countries. DD / MM / YYYY: For European Countries.
5.5.1.4 DATE
•Choose the DATE in the TIME /DATE SET menu with the UP/DOWN buttons.
•Press the ENTER button to make DATE changes.
•Select Month/Day/Year by using the LEFT/RIGHT buttons and change the values by using the UP/DOWN buttons.
•To apply the setting, press the ENTER button.
•Press the ESC button to exit.
5.5.2HARD DISK
■When you install the new Hard Disk Drive (HDD), it should be formatted before recording. Formatting is possible only when the system is in the LIVE mode.
■Factory installed a 160GB of HDD as Master (jumper setting) in the removable HDD cradle.
•Maximum 2 HDDs can be connected to the system
•Choose the HARD DISK in the SYSTEM menu with the UP/DOWN buttons.
•Press the ENTER button, and the HARD DISK menu will be displayed.
•Refer to section 6.1 in regards to HDD installation.
5.5.2.1 HDD1
•Shows the available space and the used space of HDD1.
•Select the HDD1 in HDD DISK menu to format by using the UP/DOWN buttons and press the ENTER button, and the HDD FORMAT: YES, NO will be displayed. If YES is selected by using the LEFT/RIGHT/ENTER button, it starts to formatting or select NO for going back to the previous mode.
5.5.2.2 HDD2
•Shows the available space and the used space of HDD2.
•Select the HDD2 in HDD DISK menu to format by using the UP/DOWN buttons and press the ENTER button, and the HDD FORMAT: YES, NO will be displayed. If YES is selected
- 26 -