on the window and press the Update REC.Quality button to save them.
•Installed HDD and Recording HDD: Shows currently installed HDD information such as connection information, whole capacity and used space. It shows currently being recorded HDD as well. Do not change the recording HDD as possible as you can.
•Water Mark (on the GUI): The WATER MARK allows you to verify if an original image bas been altered. Click the WATER MARK ON to put the WATER MARK on the original images. If the WATER MARK on the original images is being broken in the playback mode, the images have been altered. If not, the images have not been altered.
This function does not affect the DVR.
•Dwell. Time: It can be adjusted from 1 to 10 seconds (See #11. AUTO BUTTON for more details). This function does not affect the DVR.
•Firmware information: Current product’s firmware version and time when it was updated.
NOTE
If you connect the DVR through the GUI as a guest, you cannot change the values. It allows a guest to monitor only.
15. SEARCH
Click the SEARCH button, and it will be displayed the following window.
•The last record list
Select The last record list on the search window and press OK. It will replay from the beginning of the last list that recorded on HDD.
•The whole REC Lists
Select The whole REC Lists on the search window and press OK. The following Window will be displayed.
- 51 -