User’s Manual
3.6.2Schedule Setup
The Schedule Setup is used to set the day and night time, or weekend recording schedule. Select <Schedule Setup> from the Record Setup menu and press ENTER; the following menu is displayed.
|
| Schedule Setup |
1. | Day Time Start | AM06:00 |
2. | Day Time End | PM06:00 |
3. | Night Time Start | PM18:00 |
4. | Night Time End | AM06:00 |
5. Weekend Schedule | YES | |
6. | Weekend Start | Fri AM18:00 |
7. Weekend End | Mon PM06:00 | |
•Make appropriate changes of the start time of Day and Night Time using Direction keys.
•Press ENTER to confirm the settings or ESC to cancel.
•If you want to have a weekend record, choose <YES> to enable the Weekend Schedule in advance and then set the Weekend Start/End time. Press ESC to back to previous page.
3.6.3Preset Record Configuration
The <Preset Config> is used to select the preset recording quality and frame rate. In normal circumstances, we strongly suggest you set the item to <Standard>, the default. Below table shows the PPS and picture size under <Standard> in
Halfl-D1 mode (NTSC: 720x240@60PPS; PAL: 720x288@50PPS)
Normal PPS | Normal Size | Event PPS | Event Size | |
3.75 NTSC | 11 KB | 15 NTSC | 17 KB | |
(3.125 PAL) | (12.5 PAL) | |||
|
| |||
|
|
|
|
23