AVE AVE DR16X Viewing Live Image in Playback Mode, Dual Main Output For Unit with Turbo Module

Page 29

User’s Manual

Viewing Live Image in Playback Mode

Press the MODE key repeatedly in playback mode, a 16-window viewing mode contains both live and playback image appears. This view mode is illustrated as the following figure.

The eight windows on the top side of the screen playback the Live video from channel 1 to channel 8 respectively, and the other windows allow user to view Playback image from channel 1 to channel 8.

4.1.5Dual Main Output (For Unit with Turbo Module)

For users who use units with Turbo Modeule, they can use the Call Monitor as the second Main Monitor, and access lots of functions, such as setup OSD menu, and viewing in different mode, through the second Main Monitor. To perform this function, you have to reset a jumper positioned on the Turbo Module inside the unit.

To use this function, the VGA and BNC connectors, positioned on the rear panel, have to be connected with monitors, respectively. The VGA monitor is treated as the Main Monitor, and BNC monitor the second Main Monitor.

Press CALL key for 3 seconds, the BNC Monitor will be given the same function as the VGA Monitor, except Playback and Search function. You can use the BNC Monitor to take over the AVE DR16X / AVE DR8X unit at the same time, as if the two monitors are connected to two individual AVE DR16X / AVE DR8X units.

When using this function, a small figure () appears in the mid-button side of the two monitors—the yellow one represents the monitor is now accessed.

28

Image 29
Contents Ver User’s Manual User’s Manual Rack Mounting Important InformationTable of Content Sequence with Main Monitor Sequence with Call Monitor Overview Product Key FeaturesUser’s Manual System Setup Product Application DiagramConnecting Required Devices Connecting Devices to the UnitPosition the Unit Selecting Video FormatRear Panel Connections Connecting Short-term DeviceMain Monitor S-Video / BNC Call Monitor BNCPower Jack LAN Connector RJ-45Power Switch Camera LoopingUSB Connector Alarm I/O & RS485VGA Out RS-232CLED Definition General System SetupFront Panel Introduction Functional Keys Fast Forward Fast RewindCall/ Copy Instant RecordSEQ Sequence Direction Keys Install HDD to the UnitTo Power Up the Unit Power Up / Down the UnitPower Off RebootAdministrator Password User Password Entering OSD Setup MenuSet Date / Time System Date / Time SettingSet Date / Time Date / Time DisplayDaylight Saving Time DST Bias Record Schedule / Quality SettingRecord Mode Normal PPS Normal Size Event PPS Event Size Schedule SetupPreset Record Configuration To Record Event Video Only Per Camera ConfigurationViewing Live / Playback Video Basic OperationViewing Modes Viewing in Full ScreenViewing Live Cameras Digital ZoomTo Freeze Live Image Viewing Recorded VideoPause Playback and Single Step Forward Key Usage in PlaybackDual Main Output For Unit with Turbo Module Viewing Live Image in Playback ModeSequence with Call Monitor Sequence SetupSequence with Main Monitor Searching Recorded Video Searching by Event Searching by TimeVideo Export Export from OSD Setup MenuDevice Name Select the External DeviceAvailable SelectSelect Channel Select Video for ExportingFrom / To Time Select EventsErase Disc Digital SignatureQuick Video Export through Front Panel Export FormatTo Export Normal Video EzBurn IntroductionTo Export Event Video Dome Control Deleting Recorded VideoPurge All Data Purge All Event DataDome Connection Dome Protocol Setup3 RS485 Setup Dome Controlling Key Pan / Tilt Setting Preset PointsZoom Out Calling Preset Points All specifications are subject to change without notice Appendix a Technical SpecificationsUser’s Manual