The ultrasonics will begin immediately to remove the lead from the slide. All lead should be removed within 10 seconds. If your cleaner passes this test, its ultrasonic cavitation is acceptable.
NOTE:
To ensure consistency from test to test, be sure to repeat
test conditions - use the same solution concentration, liquid level, temperature, type of pencil, length of degassing, etc.
Service
With normal use, your Ultrasonic Cleaner should not require servicing. However, if it fails to operate satisfactorily, first try to diagnose the problem by following the suggestions in the Troubleshooting Guide.
If you find that your cleaner needs repair, carefully pack and return it to your local Service Center. If under warranty, remember to include proof of purchase. Your cleaner will be returned by ground service unless you specify otherwise.
Authorized Service Centers
Name | Address | Tel/Fax Number |
Alpha Omega | 2821 National Drive | Tel: |
Electronics Corp. | Garland, TX 75041 | Tel: |
|
| FAX: |
Crystal Electronic Inc. | 140 Centre Street | Tel: |
| Aurora, Ontario | FAX: |
| Canada L4G 1K1 |
|
Paragon Electronics | 6861 SW 196th Avenue | Tel: |
| Pembroke Pines, FL 33332 | Fax: |
Master Sonics | 77 Whiting Street | Tel: |
Repair Center | Plainville, CT 06062 | |
|
| Fax: |
15 Troubleshooting