Maxtor DVMR manual Interval Setup, Alarm Setup

CHAP. 5 Set Up

4)INTERVAL SETUP

Set the switching time interval for SEQ or PIP function.(1 sec. ~ 99 sec.)

FULL SCREEN : set the sequencing switch time interval in live full screen.

INTERVAL SETUP

SWICHING INTERVAL
FULL SCREEN	:	01 SEC
PIP SCREEN	:	01 SEC
EVENT RECORD
EVENT UPDATE TIME	: 01 SEC

PIP SCREEN : set the sequencing switch time interval of PIP window.

SELECT ▲▼◀▶, CHANGE VALUE : + -

EVENT UPDATE TIME : Set the minimum time interval of event to be listed in EVENT LIST.

If EVENT UPDATE TIME is set at 20 sec, only following event happened

20 sec or more than 20 sec later previous event shall be listed in EVENT LIST.

5) ALARM SETUP

Set type of alarm sensors connected to DVR unit.

N.O represents Normal Open type and N.C Normal Close type.

	ALARM SETUP
CHANNEL	CH1
ALARM INPUT	N.O
DURATION	005
N.O	NORMAL OPEN
N.C	NORMAL CLOSE
.......................................	DISABLE

SELECT : ▲▼, CHANGE VALUE : + -

1)ALARM INPUT : Select type of alarm sensor connected to DVR unit (N.O or N.C). Use direction button and [-] [+] button to set.

DISABLE represents not to use alarm sensor connected to DVR.

2)DURATION : Set the duration of alarm when an ALARM is activated. (0 sec. ~ 300 sec.)

25