Maxtor 4Channel Stand-alone DVMR manual ※ While entered in the Menu

Page 18

CHAP. 4 Operation

4-5. Record

Recording mode set before delivery by manufacturer (Default recording mode) is Schedule Recording. In this default recording mode, it records 24 hours/day continuously in weekday and on the weekend.

Once you press the [REC] button while you see live view, the record type is changed to Emergency Record mode.

-Emergency Record : at full resolution/in best quality

Record type : CONTINUOUS, SUPER FINE quality, 60 (50) ips at 720X240 (720x288)

-Schedule Record

Record and stop as set (time interval and

record type) in RECORD-SCHEDULE SETUP menu.

-Stop Record

Recording stopped as set in RECORD-SCHEDULE SETUP menu.

On the screen

-Emergency Record

:Red Record Icon ( ) and Record LED is lit

-Schedule Record

:Green Record Icon ( ) and Record LED is lit

-Record Stop

:White Icon ( ) and Record LED is off

-Motion Record, Alarm Record, Alarm+Motion Record

:Record standby LED blinks

:Record LED is lit

While in Emergency Record mode, press [STOP], [PLAY], [MENU], or [SEARCH] button to exit from Emergency Recording mode and return to Schedule Record mode.

For details, refer to the SYSTEM MENU – RECORD SETUP (Page 27)

-This DVR unit does not record in following conditions ;

While entered in the Menu.

No camera is connected

Overwriting is off in the Record Setup menu.

Emergency Record [RED]

Schedule Record [GREEN]

Stop Record [WHITE]

4-6. Playback

On record mode or stop mode, press [PLAY] button to play the recorded data in 1x speed. For backward playback, press [PLAY] button again.

Use Jog/Shuttle to pause and control playback speed. To stop playback, press the [STOP] button.

Using Jog/Shuttle

press the [J.SHUTTLE] button in playback mode. The [ACTIVE] LED will be lit, and Jog/Shuttle is ready for use. The [RUN] LED will blink whenever you operate the Jog/Shuttle.

For forward playback, turn the Shuttle right and turn Shuttle left for backward playback. Turn Jog using your index figure to see picture by picture in forward or backward direction. Operation of Shuttle is as follows.

1/4 x : 4 times slower than normal playback speed

1/2 x : 2 times slower than normal playback speed 1 x : Normal playback speed

2 x : 2 times faster than normal playback speed

4 x : 4 times faster than normal playback speed 16 x : 16 times faster than normal playback speed

64 x : 64 times faster than normal playback speed

17

Image 18
Contents 4Channel Stand-alone Dvmr Installation & Safeguards Environment Condition for InstallationBefore You Start Contents PTZ Camera Operation Data Back-Up Chap Features & Package Contents Package Contents FAR Focus FAR On Light on SET SET Preset⑥ Setup Menu Wide ZoomFRZ PTZZoom ModeVGA PowerSwitch EthernetCHAP.3 Installation Installation ConfigurationDetailed Installation Rack mount HDDPower CameraMonitor VCR, Video Printer Other External DeviceConnector Pin Assignment Description RS-232C ASCII-codeJog / Shuttle Factory Default System Menu Configuration Password SetupFactory Default System Log-InDisplay Configuration Live View SetupInterval Setup ※ While entered in the Menu Search Search Search BARTIME/DATE Event List CD-R Setup PAN/TILT/ZOOM Camera OperationFunction Left Entering into the MenuDown RightDisplay Setup Display SetupMonitor Setup Screen DisplayConfiguration HDD ManagementTIME/DATE Setup Camera SetupMotion Detection Area Motion SetupHighlighted Area Non-highlighted AreaInterval Setup Interval SetupAlarm Setup Alarm SetupBuzzer Setup Password SetupSystem Information Multiplex Record SetupRecord Configuration Super FineHoliday Setup Schedule SetupSchedule Setup Schedule REC SetupIP Config Setup TCP/IP SetupIP Config Setup BACK-UPConnection Setup RS-232C SetupPAN/TILT Setup Factory Default Language SetupFactory Default DVR Network Configuration PC’s TCP/IP SettingCase a Single Static IP w/Personal Router Configure the DVR as followsAccessing the DVR using the Remote Software for Case a DVRCase B Single Static IP Directly Connected to the DVR Accessing the DVR using the Remote Software for Case BRemotely ISPCase C Dynamic or PPPoE IP w/Personal Router Accessing the DVR using the Remote Software for Case C Case D Multiple Static IPs w/Personal RouterAccessing the DVR using the Remote Software for Case D Accessing the DVR using the Remote Software for Case E Setting, Playback, and Sequence buttons Remote Viewer programMain Interface Setting Screen Playback Interface through Remote Viewer Chap Network Setup Chap Network Setup Back-up CD Player Function buttonScreen division 1/4/9/16 Image Edit How do I choose a unique IP that matches my network? How do I Ping an IP address ?How do I open an MS-DOS or Command Prompt ? Why is my remote video jerky? How do I forward a port in my router?Chap Specifications Memo Best Picture Quality JPEG2000