Maxtor Built in Digital Video Recorder Connector Pin Assignment Description, RS-232C ASCII-code

						CHAP. 3 Installation
7) Connector Pin Assignment
	No		Description	NO		Description
	1	DCD	Data Carrier Detect	6	DSR	Data Set Ready
	2	RxD	Receive data	7	RTS	RS232C: Rx/Tx data
	3	TxD	Transmit data	8	CTS	RS232C: Rx/Tx data
	4	DTR	Data Terminal data	9
	5	GND	Signal Ground

8) RS-232C ASCII-code
Following ASCII-Codes(Hexa-Code) are for programmers who want to control DVR unit
via the RS232C Port using keyboard of PC.
(The following table is based on 16ch DVR.)								All ASCII-Code is 1 Byte.
REC	‘R’	DOWN	‘J’	PTZ	‘T’	KLOCK	‘C’	CH6	‘6’	CH13	’#’
STOP	‘S’	LEFT	‘H’	ZOOM	‘Z’	QPLAY	‘Y’	CH7	‘7’	CH14	’$’
PLAY	‘P’	RIGHT	‘K’	FRZ	‘F’	CH1	‘1’	CH8	‘8’	CH15	’%’
Pause	‘A’	NEXT	‘N’	MODE	‘D’	CH2	‘2’	CH9	‘9’	CH16	’^’
SERCH	‘E’	ENTER	0x0d	PIP	‘I’	CH3	‘3’	CH10	’0’
MENU	‘M’	-	‘<‘	SEQ	‘Q’	CH4	‘4’	CH11	’!’
UP	‘U’	+	‘>’	J.SHU	‘L’	CH5	‘5’	CH12	’@’

12