Maxtor Built in Digital Video Recorder manual PAN/TILT/ZOOM Camera Operation, CD-R Setup

Page 19

CHAP. 4 Operation

4-8. PAN/TILT/ZOOM Camera Operation

Press [PTZ] button first for PTZ control mode.

User can control PTZ camera connected to DVR unit by pressing any one of those 5 buttons, one after the other, as needed, and it is just like control by separate PTZ controller.

Button

PTZ command

MENU

Select the PTZ command

 

 

NEXT

Select the PTZ command

 

 

+

Select the next camera

 

 

-

Select the before camera

 

 

ENTER

When you press this button, PTZ command is activated.

 

If you leave this button, PTZ command stop.

 

 

4-9. Data Back-Up

Enter into SYSTEM MENU-BACKUP-CDR SETUP.

1)Insert empty CD-R media into CD writer and select the start time & date from which you want to back up.

The START & END time / date in HDD sub-menu only shows start and end of recording.

This is not selectable and editable.

700MB on CD-R sub-menu represent size of CD-R media inserted.

2)To set start time of back-up and back-up data size, press the [ENTER] button first on [START] or [SIZE] sub-menu and adjust using [+] or [-] button and move using [LEFT] and [RIGHT] button for next change. After setting the time & date and back-up data size, press the [ENTER] button again to exit.

End of back-up time will be calculated automatically as per start time & date and the back-up

data size you set.

User can select the back-up data size (size of back-up data from start of back-up) on [SIZE] item but END of back-up time is automatically determined by DVR system.

3)Press [ENTER] button on BURN sub-menu. DVR system starts burning CD.

4)When burning is completed, CD-R media will come out automatically. In the next CD back-up, start time of CD-R shall be the end time of previous CD-back-up, and you can back-up from that for continuous data back-up. If you need another backup, repeat the above procedure. To stop backup, press the [MENU] button.

During burning CD, it’s impossible to cancel burning process.

5)User can verify the back-up CD on PC with BACK-UP CD PLAYER (Included in Package).

 

CD-R SETUP

 

 

 

CD-R SETUP

 

 

 

HDD

 

 

 

 

HDD

 

 

[START] 2005/AUG/07 AM04:04:12

[START] 2005/AUG/07 AM04:04:12

 

[ END ] 2005/AUG/08 PM08:12:23

[ END ] 2005/AUG/08 PM08:12:23

 

CD-R

700 MB

CD-R

 

 

[START] 2005/AUG/07 AM04:04:12

[START] 2005/AUG/07 AM04:04:12

 

[ END ] 2005/AUG/08 PM08:12:23

[ END ] 2005/AUG/08 PM08:12:23

 

[ SIZE ] 700 MB - > 700MB

[ SIZE ]

000MB

 

 

BURN

 

 

 

BURN

 

 

 

 

 

 

 

 

CD-RW BURNING : IMAGE DATA.

 

 

 

 

 

 

 

 

 

 

EXIT : [MENU]

 

 

EXIT : [MENU]

 

 

 

 

 

 

 

 

18

Image 19
Contents 4Channel Built in DVR Environment Condition for Installation Installation & SafeguardsBefore You Start Contents FAQ Chap Chap Features & Package Contents Package Contents Search ③ Setup MenuStop PlayEthernet ④ ⑥Installation Configuration CHAP.3 InstallationDetailed Installation Connector cover bracket Camera PowerMonitor Other External Device VCR, Video PrinterRS-232C ASCII-code Connector Pin Assignment DescriptionSystem Log-In System Menu Configuration Password SetupFactory Default Factory DefaultLive View Setup Display ConfigurationInterval Setup ※ While entered in the Menu Search Search BAR SearchTIME/DATE Event List PAN/TILT/ZOOM Camera Operation CD-R SetupRight Entering into the MenuDown LeftScreen Display Display SetupMonitor Setup Display SetupHDD Management ConfigurationCamera Setup TIME/DATE SetupNon-highlighted Area Motion SetupCamera Active Setup Motion Configuration Motion Detection AreaAlarm Setup Interval SetupAlarm Setup Interval SetupPassword Setup Buzzer SetupSystem Information Super Fine Record SetupRecord Configuration MultiplexSchedule REC Setup Schedule SetupSchedule Setup Holiday SetupBACK-UP TCP/IP SetupIP Config Setup IP Config SetupRS-232C Setup Connection SetupPAN/TILT Setup Language Setup Factory DefaultFactory Default PC’s TCP/IP Setting DVR Network ConfigurationLocally Accessing the DVR using the Remote Software for Case aISP Accessing the DVR using the Remote Software for Case BRemotely Case B Single Static IP Directly Connected to the DVRCase C Dynamic or PPPoE IP w/Personal Router Case D Multiple Static IPs w/Personal Router Accessing the DVR using the Remote Software for Case CAccessing the DVR using the Remote Software for Case D Accessing the DVR using the Remote Software for Case E Remote Viewer program Setting, Playback, and Sequence buttonsMain Interface Setting Screen Playback Interface through Remote Viewer Chap Network Setup Chap Network Setup Function button Back-up CD PlayerScreen division 1/4/9/16 Image Edit How do I Ping an IP address ? How do I choose a unique IP that matches my network?How do I open an MS-DOS or Command Prompt ? How do I forward a port in my router? Why is my remote video jerky?Specification of DVR Chap SpecificationsSpecification of Monitor Memo Best Picture Quality JPEG2000