Maxtor Built in Digital Video Recorder Motion Setup, Motion Detection Area, Non-highlighted Area

Page 24

 

 

 

 

 

 

 

 

CHAP. 5 Set Up

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CAMERA ACTIVE SETUP

 

 

MOTION CONFIGURATION

 

CH

STATUS

LIVE

REC

 

CHANNEL

01

 

 

 

 

---------------------------------------------------------------------------

 

SENSITIVITY GRADE

01

01

ACTIVE

ON

ON

 

 

MOTION DISPLAY TYPE

OFF

02

ACTIVE

ON

ON

 

 

 

 

03

LOSS

OFF

OFF

 

RECORD DURATION

05 SEC

04

ACTIVE

ON

OFF

 

 

 

 

 

 

 

 

 

 

 

 

 

SELECT : ▲▼ ◀▶, & [ENTER]

SELECT ▲▼, CHANGE VALUE : + -

(3)CAMERA ACTIVE SETUP : With direction button, move to option to be changed, and press [ENTER] button to select [ON/OFF]. If it is set at LIVE [OFF] and REC [ON], DVR system records, but does not show live image of set channel.

-STATUS : Shows if image from a specific channel is coming for live display and recording. In normal camera condition, it is ACTIVE, but LOSS is displayed when the cable is disconnected or camera is not working.

-LIVE : Decides whether to show LIVE screen image or not.

-REC : Decides whether to record relevant channel or not.

(4)MOTION SETUP: You can set sensitive of motion detection in 4 steps, motion detection area and others in relation to motion recording in this menu.

(4)-1. MOTION SETUP

-SENSITIVITY GRADE : Adjusts motion detection sensitivity. (LOW, MEDIUM, HIGH, VERY HIGH)

-MOTION DISPLAY TYPE : Showing cells with motion detected differently from cells with no motion .

-RECORD DURATION : Whenever motion is detected and it is set at Motion Recording mode, DVR system records for RECORD DURATION from time motion is detected. (1sec. ~ 99 sec.) (Default duration : 5 sec.)

(4)-2. MOTION MASK SETUP: Set motion detection area. Direction button is for moving and [ENTER] button is for selection, and [MODE] button is for changing mode of MASK SETUP.

-CELL : Move to the location which you want to detect and then press the [ENTER] button. Highlighted cell area means motion detection area.

-ALL ON : Set all cells as detection area. Use [ENTER] button to set.

-ALL OFF : Set all cells as no-detection area. Use [ENTER] button to set.

-BLOCK ON : Select detection area by block. Use [MODE] button and press [ENTER] button to set ON.

-BLOCK OFF : Select un-detection area by block. Use [MODE] button and press [ENTER] button to set ON.

Highlighted Area

(Motion Detection Area)

Non-highlighted Area

(No Motion Detection Area)

23

Image 24
Contents 4Channel Built in DVR Installation & Safeguards Environment Condition for InstallationBefore You Start Contents FAQ Chap Chap Features & Package Contents Package Contents ③ Setup Menu StopPlay Search④ ⑥ EthernetCHAP.3 Installation Installation ConfigurationDetailed Installation Connector cover bracket Power CameraMonitor VCR, Video Printer Other External DeviceConnector Pin Assignment Description RS-232C ASCII-codeSystem Menu Configuration Password Setup Factory DefaultFactory Default System Log-InDisplay Configuration Live View SetupInterval Setup ※ While entered in the Menu Search Search Search BARTIME/DATE Event List CD-R Setup PAN/TILT/ZOOM Camera OperationEntering into the Menu DownLeft RightDisplay Setup Monitor SetupDisplay Setup Screen DisplayConfiguration HDD ManagementTIME/DATE Setup Camera SetupMotion Setup Camera Active Setup Motion ConfigurationMotion Detection Area Non-highlighted AreaInterval Setup Alarm SetupInterval Setup Alarm SetupBuzzer Setup Password SetupSystem Information Record Setup Record ConfigurationMultiplex Super FineSchedule Setup Schedule SetupHoliday Setup Schedule REC SetupTCP/IP Setup IP Config SetupIP Config Setup BACK-UPConnection Setup RS-232C SetupPAN/TILT Setup Factory Default Language SetupFactory Default DVR Network Configuration PC’s TCP/IP SettingAccessing the DVR using the Remote Software for Case a LocallyAccessing the DVR using the Remote Software for Case B RemotelyCase B Single Static IP Directly Connected to the DVR ISPCase C Dynamic or PPPoE IP w/Personal Router Accessing the DVR using the Remote Software for Case C Case D Multiple Static IPs w/Personal RouterAccessing the DVR using the Remote Software for Case D Accessing the DVR using the Remote Software for Case E Setting, Playback, and Sequence buttons Remote Viewer programMain Interface Setting Screen Playback Interface through Remote Viewer Chap Network Setup Chap Network Setup Back-up CD Player Function buttonScreen division 1/4/9/16 Image Edit How do I choose a unique IP that matches my network? How do I Ping an IP address ?How do I open an MS-DOS or Command Prompt ? Why is my remote video jerky? How do I forward a port in my router?Chap Specifications Specification of DVRSpecification of Monitor Memo Best Picture Quality JPEG2000