CHAP. 6 Network Setup
Setting Screen
Name (LABEL) : This just identifies your settings. The settings are automatically saved under this label when you hit ‘OK’.
IP Address : Based on your network scenario and from where you’re accessing, enter the appropriate IP address.
PORT : Enter the Port Number you assigned the DVR.
ID : Always enter ‘admin’
Password : This must match the password on the DVR. For simplicity, just use numbers.
- It can add and save several IP Addresses for prompt
PTZ TYPE : If using PTZ device or camera, select the protocol your PTZ camera is using from the list of preconfigured protocols.
Circular Monitoring Interval : This indicates the speed of the channels sequence when the SEQUENCE button is used from the main interface.
PTZ Baud Rate : Enter the Baud Rate of your PTZ camera.
Run in full screen mode : When checked, this will enable the program to
Set Path to Save Downloaded image : Determines the location and folder on your PC where the downloaded video clips are stored. If you do not specify a valid location, The viewer program will save all files in the default location of C:\Program Files\DvrRemoteViewer4
39