Philips SWW1810 user manual Mount your receiver on the back of the Hdtv

Remove the white protective film from one of the supplied adhesive tapes.

Secure the glued side of the adhesive tape and attach it to the central bottom area of the receiver.

Mount your receiver on the back of the HDTV

1

2

3 Select a flat location on the rear side of the HDTV.

4 Remove the white protective film from the other adhesive tape.

5 Secure the glued side of the adhesive tape and attach it to the selected rear side of the HDTV.

6 Align the adhesive tape on the receiver with the one on the HDTV until both the receiver and HDTV are mounted together firmly.

Note

•• The use of adhesive tapes is an alternative mounting option when the receiver cannot be fixed.

•• When you mount the receiver at the back of the HDTV, avoid blocking the ventilation holes of the HDTV.

•• For safety reason, check regularly if the HDTV and receiver are mounted together firmly.

•• The receiver is not recommended for in-the-wall installation.

14EN