4 Installation
Connect the transmitter to your HD devices
You can connect two audio/video sources to the transmitter at the same time, but only one source can be selected and played.
2 Connect the supplied power adapter to the transmitter.
•Connect one end of the power adapter to the DC IN jack of the transmitter.
•Connect the other end of the power
adapter to a power outlet.
»» The power button of the transmitter is lit in solid blue and turns red in standby mode.
English
1 Connect the audio/video source to the transmitter using the supplied HDMI cable.
•Connect one end of the HDMI cable to the HDMI IN connector of the transmitter.
Note
•• There are two HDMI IN ports but only one HDMI cable is supplied.To connect two audio/video sources to the transmitter at the same time, you need an additional HDMI cable.
•Connect the other end of the HDMI cable to the HDMI OUT connector of the video source.
Connect the receiver to the HDTV set
HDMI OUT | IR IN |
|
DC 5V
2
1
HDMI IN
1 Connect the receiver with an additional HDMI cable (not supplied):
• Connect one end of the HDMI cable to the receiver.
• Connect the other end to the HDMI IN connector of your HDTV.
2 Connect the supplied power adapter to the receiver:
•Connect one end of the power adapter to the DC IN jack of the receiver.
•Connect the other end of the power adapter to a power outlet.
»» The power button of the receiver is lit in solid blue and turns red in standby mode.
EN 9