Basic Operations
Switching the system on/off
●Press STANDBY ONB (B on the remote).
➜“HELLO” is displayed briefly.The system will switch to the last selected source.
●Press DISC, TUNER or AUX on the remote.
➜The system will switch to the selected source.
To switch the system to standby mode
●Press STANDBY ONB (B on the remote). ➜ “BYE BYE” is displayed briefly.The volume level, interactive sound settings, last selected source and tuner presets will be retained in the player’s memory.
Sound Control
DBB, DSC and LOUDNESS sound features cannot be activated at the same time.
DBB (Dynamic Bass Boost)
DBB enhances the bass response.
●Press DBB on the remote to enable/disable DBB feature.
➜ Some discs might be recorded in high modulation, which causes a distortion at high volume. If this occurs, switch off DBB or reduce the volume.
DSC (Digital Sound Control)
English
Volume control
Turn VOLUME
➜”VOL XX” is displayed on the display panel. “XX” denotes the volume level.
To listen through the headphone
●Connect the headphone plug to the n socket at the front of the amplifier.
➜ The speakers will be muted.
To switch off the volume temporarily
●Press MUTE on the remote.
➜ Playback will continue without sound and “MUTING” flashes.
●To activate sound reproduction, you can:
– press MUTE again;
– adjust the volume controls;
– change source.
DSC provides a different type of preset sound equalizer setting.
●Press DSC on the remote repeatedly to select: CLASSIC, JAZZ, POP or ROCK.
LOUDNESS
LOUDNESS feature enables the system to automatically increase the treble and bass sound effect at low volume (the higher the volume, the lower the treble and bass increase).
●Press LOUDNESS on the remote to enable or disable LOUDNESS feature.
➜ icon appears/disappears after this feature is enabled/disabled.
Dimming the display screen
●In standby mode only, press DIM repeatedly to select different levels of brightness for the display screen.
43