Philips MCD700/93 Setting sleep/wake-up timer, Sleep timer setting, To deactivate the sleep timer

Other Functions

Setting sleep/wake-up timer

Sleep timer setting

In power-on mode, the sleep setting enables the system to switch to standby mode automatically at a preset time.

1In power-on mode, press SLEEP/TIMER on the remote repeatedly to select a preset time.

➜The selections are as follows (time in minutes):

00 ➜ 10 ➜ 20 ➜ 30 ➜ 40 ➜ 50 ➜ 60 ➜ 70

➜80 ➜ 90 ➜ 00

2When you reach the desired length of time, stop pressing SLEEP/TIMER.

➜ ”SLEEP” appears.

To deactivate the sleep timer

●Press SLEEP/TIMER repeatedly until “00” is displayed, or press STANDBY ONB (B on the remote).

In standby mode, the timer setting enables the system to switch on automatically at a set time.

Wake-up timer setting

IMPORTANT!

–Before setting the timer, ensure that the clock is set correctly.

–The volume of the timer will increase gradually to the last tuned volume level. If the last tuned volume level is too low, the set will then increase to a predetermined minimum audible level.

1 Press and hold SLEEP/TIMER until the time flashes on the display.

➜ ”TIME SET” is displayed briefly.Then, the hour digits flash on the display screen.

2Turn VOLUME -/+clockwise or anticlockwise or press VOLUME -/+on the remote to set the hours.

3Press SLEEP/TIMER to confirm.

➜ The minute digits flash on the display screen.

4Turn VOLUME -/+clockwise or anticlockwise or press VOLUME -/+on the remote to set the minutes.

5Press SLEEP/TIMER to confirm the time setting.

➜ ”OFF” flashes on the display screen.

6Turn VOLUME -/+clockwise or anticlockwise or press VOLUME -/+on the remote to select “ON”.

➜ icon appears on the display screen.

To deactivate the timer

● Select “OFF” at Step 6.

English

55