Connections
Speaker | Speaker |
(right) | (left) |
| MW antenna |
| FM |
| antenna |
AC power cord
English
IMPORTANT!
–The type plate is located at the bottom of the system.
–Before connecting the AC power cord to the wall outlet, ensure that all other connections have been made.
–Never make or change any connections with the power switched on.
Connecting the speakers
Connect the speakers to the SPEAKERS (8Ω) terminals with two speaker cables. Right speaker to “R” and left speaker to “L”, red wire to “+” and silver wire to
1 | 2 |
For MCD700 |
|
1 | 2 |
For MCL707 |
|
Notes:
–Ensure that the speaker cables are correctly connected. Improper connections may damage the system due to
–For optimal sound performance, use the supplied speakers.
–Do not connect more than one speaker to any one pair of +/- speaker jacks.
–Do not connect speakers with an impedance lower than the speakers supplied. Please refer to the SPECIFICATIONS section of this manual.
35